Answer / gajanan

there are 2 reasons
1. the windings of motor are displaced in space and phase
but that of xmer are only in phase.
2. the windings of xmer are concentrically connected and in
conc conneced wind no mechanical motion is produed

Answer / nithi

Three phase transformer cannot rotate like 3phase motor.becoz,

1.There is no mechanical displacement of winding.so,no
rotating magnetic field.

2.There is no air-gap b/w py & sec winding.

Answer / jay

A current carrying conductor rotates only when it is placed in an external rotating magnetic field. Therefore there are two parts in any motor i.e. rotor and stator, one for the purpose of field and other for rotation. although there is a rotating field in a 3 ph transformer the flux and the magnetic field is the same (mutual flux). for the force there should be external magnetic field,current and conductor itself. As there is no external field all the pr and secondary winding do is to induce voltages.

Answer / suresh

the primary and the secondary are the same frequencyin the
case of three phase transformer where as
in the same frequency the induction motor canot rotate

Answer / a.ashraif

Because Transformer works on the princle of mutual
induction moreover it is a static device not an rotating
device and also it is only capable of stepping up or step
down of voltage so only it cant rotae like a three phase
motor

Answer / shilpa

because unlike an induction motor the secondary is not
provided with a shaft and mechanical arrangements making it
able to rotate . otherwise th e induction motor also works
on the same principle and rotates.

Answer / mohammad farman khan

Because Transformer only transfer load from higher level to
lower level in technical can say Transformer can stepup and
step down the voltage. so, this is call static device not
moving device.Configuration of transformer is Dry type Oil
type for distribution of load with diffent cooling
process . Three phase motor has rorating field through
shaft of motor.Due to this cause transformer rating always
in ative load (KVA) not in Real Load (KW).and Motor has
name with real load and HP rating.

what will happen if dc supply is given to ac motor?

9 Answers   CTS,

What is plc and how to do preventive maintenance

1 Answers  

hii.i am a B.TECH(EEE) graduate.i want 2 know wat type of qusns r asked in sbi clerk interview 2 candidates like me??kindly post answers ASAP..

1 Answers  

HOW TO CONNECT THREE PHASE OVER LOAD RELAY FOR SINGLE PHASE

2 Answers   Quest,

why contactor not provided between output of VFD and motor?

6 Answers   Siemens,

i have a Connected Load of 280KW and Maximum Demand of 224KW to one of SMDB under design with me. which criteria should i consider to design panel and main cables connected Load or Maximum Demand 1)Breaker rating 2)Panel Busbar rating 2)Incommer cable sizing (ignore Voltage drop)

1 Answers  

what happen ehen synchronisation is done at below rated speed

0 Answers  

If the output of a 100kva, 415v generator is stepped up to 11kv with a 500kva transformer,can the transformer be Loaded above the source generator loading?

2 Answers  

what is the right method of laying cable tray if we are using EOT crane in shed, better is below or up

1 Answers  

Why two nos. un-tensioned wires are placed inside the PSC poles used by powergrid in RGGVY works.

2 Answers   Bhel, Power Grid,

Write the analogous electrical elements in force current analogy for the elements of mechanical translational system.

0 Answers  

what is the Space heater? why using in Electrical motor?

3 Answers