Is it possible to increasing the real power generation by
reducing the reactive power in power generation plants
Answers were Sorted based on User's Feedback
Answer / manuks
When we bring down the reactive power, there will be some
decrease in the load current of the machine. Hence we get
more allowance to get additional load on it which eventually
results in more power output from the machine.
| Is This Answer Correct ? | 4 Yes | 1 No |
Answer / arvind
yes it is possible, but to do that you have to overload the
generator, by doing that real power will increase and there
is no need to supply reactive power.
| Is This Answer Correct ? | 1 Yes | 0 No |
Answer / shiju
we can't bring down reactive power in power generation plant, you are talking about power plant which is connected to grid.in island mode operation we can't reduce reactive power it depends characteristics of load.
| Is This Answer Correct ? | 1 Yes | 0 No |
Please let me know when replacing electromechanical Relays for protection of generators with sr489 multilin Relay, then there is no need to use 86 master trip relay Too. I am wondering this multilin relay has no contact to Stop breaker reclosing as 86 does
explain the details about vaccum circut breaker and advantages?
what is unbalanced rotating magnetic field?
What is voltage ratio of a transformer?
63MVA,220KV/6.9KV Transformer LV side neutral is connected to Earth pit through NGR. Whether this earth pit required to connect with near by below grouding earth mat or it is to be kept separate?
Can Induction motor run at over rated speed? ( 15oo rpm is rated speed for 50HZ. is it possible to ride 3000 RPM with same motor with the help of VVVFD for continues ride of 100HZ)
What is meant by derating factor?
If there are two transformer having rating of 2.5mva, 6.6kv/440v(satr-star),and the load is 600kw then what is better to maintain less losses in transformer having both transformer in parellel or only single transformer connected to load? Please give calculated answer
Why we use neutral cable just half from phase cable.Tell me briefly,please.
what happens when reactive power increases ? does the reactive power loss increase or decrease ?
How to size fuse? How to size MCB?
how to calculate power loss cost of aluminium conductor and copper conductor?v=500v.i=100A.x-section area=68mm.squre conductor
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)