Question 64 – According to a heuristic of chemical engineering plant design, assume a pressure difference dP = 4 psi for each 10-ft rise in elevation. A pump is needed to pump liquid from a storage tank at a lower elevation to a heating tank at a higher elevation with the elevation difference of 60 ft. (a) Find the pressure loss due to such elevation. (b) If the required minimum inlet pressure to the heating tank is 9 psi, with 1 control valve is installed between pump and heating tank, what is the dP minimum required for the control valve and the entrance to the heating tank when the heuristic mentions that at least 10 psi is required for the control valve? (c) The pressure at the inlet of the pump is 8 psi and the flowrate of the liquid produces pressure head of 50 psi. What is the total pressure produced by the pump? (d) Assume a pipeline dP of 2 psi / 100 ft for liquid flow in a pipe according to heuristic, what is the approximate maximum length of the pipe in ft that can be installed between the pump and the heating tank?

1 Answers  

---

What is the import procurement cycle?

0 Answers  

---

why we make urea prills , why we do not make crystals of urea,

1 Answers   IFFCO,

---

Hi. I have completed my masters in chemical engineering from M S University in year 2008 and now going to do MS Chemical engineering in Lamar University. I am planning to appear for interview in two weeks from now. What are the expected questions from VO regarding masters after masters ? and wat should i expect to give reply ? kindly give your suggestions. Thanks

0 Answers  

---

repected sir i have given gate exam today.......... if i ll get the better rank in that ....what is the next process .....shall i give another one test......or wat....i dint get properlly..... plz help me or mail me on Nish_gasti@yahoo.co.in

0 Answers   IOCL,

---

---

what are lubricants using in compression.

1 Answers  

---

ELECTRICAL TECHNOLOGY - EXAMPLE 16.3 : In the design of a solar power system steps of calculations below are followed : (a) The power output of the inverter of the solar panel is 100 watts. What is the power input, Pin to the inverter when the efficiency of the inverter is 50 %? (b) If the rated power of the inverter is 300 watts, how many inverter is needed for the solar panel? (c) Charge controller of V = 12 volts is used to supply power to the inverter. What is the input current I to the inverter? (d) If the charge controller capacity is 10 A, how many charge controllers are needed? (e) If a biochemical mixer consumes 100 watts, running for 2 hours per day, what is the energy consumption in kilowatt hour per day? (f) What is the input energy needed when the efficiency of the inverter is 50 %? (g) If your area receives 2.88 hours of full sunlight per day, how much energy, in kilowatt hour can be produced per day when one solar panel can produce 20 watts of power? (h) If you know that you have to produce total energy as the answer for (f), how many solar panels are needed? (i) Each V = 12 V battery has 5 ampere hours. If the total energy needed is in answer (f), then how many batteries are needed to run the biochemical mixer if without sunlight for 3 days?

1 Answers  

---

what is mean by refinery

3 Answers   Reliance,

---

QUANTUM BIOLOGY - EXAMPLE 33.4 : (a) According to Landauer (1986), the capacity of human memory is approximately X bits. Assume that a human retains 2 bits / second of visual, verbal, tactile and musical memory, find the value of X if a human lifetime is approximately 2.5 billion seconds. (b) The total power consumption of the human brain is about 25 Watts. The bread of 100 grams will produce 1000 kilojoules of energy. How much bread is needed to run a human brain for 1 day?

1 Answers  

---

Is there a quick rule-of-thumb to estimate a gas side heat-transfer rate inside the tubes of a shell and tube heat exchanger?

0 Answers  

---

List the advantages and disadvantages of a pfr?

0 Answers  

---

what is the cast iron grade of composition of c-3.06% , Mn- 0.48% , Si-2.38% , S-0.088% , P-0.092% , Cr-0.12% , Ni- 0.012% , Mo-0.00%

0 Answers   L&T,

---