Answer / valmik joshi

Concrete a material in which cement ,sand and aggregate to be used with proper mixing with water. in this cement may be used as a binding material so concrete gains solid compressive strength after 28 days but concrete is weaken in tensile strength so, it will be embedded with reinforcement to provide bonding between steel and concrete. 7 types of concrete grade to be used in concreting work.

how to calculate water proofing area and what is the easy process. explain

0 Answers  

---

what is the use of steel rods of 16mm or 20mm used for 4.45mts for closing gutter.one mate consumes how many kgs with a gap of 6inches.

0 Answers   HSSB, JSW,

---

how many AAC blocks of size 600*200*225 mm are required for 1 cu.m of area

1 Answers  

---

How Many Brick in One Cubic Meter.

9 Answers   TUV,

---

A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals

0 Answers  

---

what will be the grade of concrete for PCC having ratio 1:4:8?

8 Answers   L&T, UIPL,

---

How will drive weight formula for circular cylinder steel bar in kg/ m please step by step drive?

0 Answers  

---

How to provide spacer bar in barbending work,parallel to bar or inclined to bar? What is the reason?

4 Answers  

---

In which year onward limit state method used in india...

1 Answers  

---

What is most important to learn in Civil Engineers? AutoCadd,Staad, or Primavera...

3 Answers  

---

Define slump in terms of slump test

6 Answers  

---

Whr is use tierod???what is standard size of it

2 Answers   Orbit Corporation,

---