i am going to appear vedanta written test so plz can any
body suggest me for this on madhu.5393@gmail.com
No Answer is Posted For this Question
Be the First to Post Answer
What are demand of crotonaldehyde99% in the worldand its international market ?
What are the methods involved to test helium leak testing in a vacuum system?
Hello i am a chemical engineer presently looking for a job i am applying many jobs in naukri and in all job portals but i am not getting any call or interview so kindly some one help me in this regard soundar
What is an additive?
ENVIRONMENTAL ENGINEERING - QUESTION 22.3 : A well delivers 225 US-gallons per minute of water to a chemical plant during normal system operation. (a) Calculate its flowrate in the unit of mega US-gallon per day or MGD. (b) The following formula is written next to the chlorine feed point : (chlorine feed rate, lb / day) = (flowrate, MGD) X (dose, mg / L) x (8.34). If this formula is correct, then what should the chlorine feed rate to be in pounds per day (lb / day) if the desired dose is 2 mg / L. (c) Prove by calculations that the constant 8.34 in the formula next to the chlorine feed point is correct. Let 1 US-gallon = 3.78541 L and 1 mg = 0.0000022046 pound.
Can asphalt be recycled to form a useful product?
I HAVE BEEN SELECTED FOR IOCL PANIPAT INTERVIEW,ACCTUALLY IAM DOING APPRENTIES TRAINEE IN CPCL.IAM GOING TO ATTEND THE IOCL PANIPAT INTERVIEW.SO PLEASE HELP ME HOW I PREPARE FOR INTERVIEW BY SUBJECT AND ALSO BY FIELD.
DEAR SIR, IS IT ANY BARC TECHNICAL OR INTERVIEW QUESTION BOOK IN CHEMICAL ENGG LAST YEARS IN MARKET? ALSO GIVE THE PATTERN HOW TO PREPARE AND WHAT TYPE OF QUESTION THEY ASKED?
QUANTUM COMPUTING - EXAMPLE 32.3 : A system of linear congruences consists of 3 equations : X ≡ 1 (mod 3), X ≡ 3 (mod 5), X ≡ 4 (mod 6). X has positive values. (a) List the values of these equations from 1 to 35. Then find the minimum value of X. (b)(i) Find the least common multiple (LCM) of b = 3, 5 and 6 where X ≡ a (mod b). (ii) If b - a has the same value of all equations above, then X + (b - a) is divisible by LCM. Find the value of minimum value of X via LCM division.
What are angle of repose applications in the chemical industry?
If flow rate of natural gas mixture in sweating gas unite is 460000 m3/day Can it be converted into mole/day?
CHEMICAL MATERIAL BALANCE - EXAMPLE 2.5 : In a non-dilute absorber, the inlet gas stream consists of 8 mol % carbon dioxide in nitrogen. By contact with room temperature water at atmospheric pressure, 65 % of the carbon dioxide from a gas stream has been removed. (a) Find the mole ratio of carbon dioxide and nitrogen gases at inlet and outlet gas streams. (b) The Henry's Law provides y = 1640 x for carbon dioxide in water. Find the mole ratio when x = 0.0000427. Mole ratio is y / (1 - y) for y.