Question 79 - (a) The American Petroleum Institute gravity, or API gravity, is a measure of how heavy or light a petroleum liquid is compared to water. Let SG = specific gravity of petroleum liquid, and V = barrels of crude oil per metric ton. Given the formula for API gravity = 141.5 / SG - 131.5 and V = (API gravity + 131.5) / (141.5 x 0.159), find the relationship of SG as a function of V. (b) An oil barrel is about 159 litres. If a cylinder with diameter d = 50 cm and height h = 50 cm is used to contain the oil, find the volume V of the cylinder in the unit of oil barrel by using the formula V = 3.142 x d x h x d / 4. (c) First reference : 1 cubic metre = 6.2898 oil barrels. Second reference : 1 cubic metre = 6.37 oil barrels. What are the 2 factors that cause the difference in such reference data?

1 Answers  

---

what is the speed of a rotary drier

3 Answers  

---

How i can calculate heat transfer in reactor at unsteady state and what data should i have? I want equation and process to calculate it? As there is steam or brine in jacket

0 Answers  

---

How are vessel lined with glass or how are they coated?

0 Answers  

---

What are the effects of oils on the properties of Polyolefins?

0 Answers   IOCL,

---

CHEMICAL FLUID MECHANIC - EXAMPLE 3.2 : The terminal velocity of a falling object, v is given by v = sqrt [ 4g (R - r) D / (3Cr) ] where sqrt is the square root of, g = 9.81, D = 0.000208, R = 1800, r = 994.6, m = 0.000893. The Reynold number, L is given by L = rD (v) / m. The C for various conditions are : C = 24 / L for L < 0.1; C = 24 (1 + 0.14 L^0.7) / L for 0.1 <= L <= 1000; C = 0.44 for 1000 < L <= 350000; C = 0.19 - 80000 / L for 350000 < L. Find the value of v for the situation above by trial and error, ^ is power, <= is less than or equal to.

1 Answers  

---

A cylindrical vessel of 10m height has water upto 6m and is under a pressure of 15bar.What will be the pressure at the bottom most point of the vessel?

4 Answers  

---

MASS TRANSFER - EXAMPLE 4.2 : In a non-dilute absorber, graphical method is used to represent the process. In an X - Y coordinate system, X-axis represents mole of carbon dioxide / mole of water and Y axis represents mole of carbon dioxide / mole of nitrogen. The inlet gas stream consists of 8 mol % of carbon dioxide in nitrogen. (a) Find the S / G minimum as a slope that goes through the point (0, 0.0304) and (0.0000488, 0.086957). (b) Find the actual slope of operating line when it is 1.5 times the S / G minimum! (c) Find the value of x for inlet gas stream when y = 1640 x, y is mole fraction of carbon dioxide in nitrogen.

1 Answers  

---

Explain the difference between cfm (cubic feet per minute) and scfm (standard cubic feet per minute)?

0 Answers  

---

Define an additive?

0 Answers  

---

What are the steps required to design a vapor-liquid separator or flash drum?

0 Answers  

---

In case of welded vessels why is stress relieving in the form of post-weld treatment necessary?

0 Answers  

---