What is the angle of repose?
No Answer is Posted For this Question
Be the First to Post Answer
The power required for size reduction in crushing is???
what is the difference between car seal close/open valves and lock close/open valves?
What are advantages using hollow shaft impeller?
What are demand of crotonaldehyde99% in the worldand its international market ?
QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.2 : (a) Let | - > = 1 | x > + 0 | y >, | | > = 0 | x > + 1 | y >. Find the value of 2 | x > + 3 | y > in term of | - > and | | >. (b) Let m to be the reduced mass. Find the value of m in term of Ma and Mb where 1 / m = 1 / Ma + 1 / Mb.
QUANTUM COMPUTING - EXAMPLE 32.7 : If | ± > = 0.707 ( | 0 > ± | 1 > ), prove that | Ψ (t = 0) > = | 0 > = 0.707 ( | + > + | - > ).
What is the meaning – strain? In a distillation column, if a metal block 10 cm on a side is deformed so that it becomes 9 cm long due to cooling effect, what is the strain involved in percentage?
Question 69 - A well delivers 225 US-gallons per minute of water to a chemical plant during normal system operation. (a) Calculate its flowrate in the unit of mega US-gallon per day or MGD. (b) The following formula is written next to the chlorine feed point : (chlorine feed rate, lb / day) = (flowrate, MGD) X (dose, mg / L) x (8.34). If this formula is correct, then what should the chlorine feed rate to be in pounds per day (lb / day) if the desired dose is 2 mg / L. (c) Prove by calculations that the constant 8.34 in the formula next to the chlorine feed point is correct. Let 1 US-gallon = 3.78541 L and 1 mg = 0.0000022046 pound.
ENGINEERING MECHANIC - EXAMPLE 15.1 : What is the meaning – strain? In a distillation column, if a block 10 cm on a side is deformed so that it becomes 9 cm long, what is the strain involved in percentage?
which reformer efficiencywise best?
Explain various protein purification techniques?
What is the method involved in analyzing powders for composition?