Answer / eqbal_asif123

Transformers 1 KVA and larger, rated at 60 Hz, should not be
used on 50 Hz service
due to higher losses and resultant heat rise. However, any
50 Hz transformer will
operate on 60 Hz service.
A 60 Hz design is physically smaller than a 50 Hz design. DO
NOT use 60 Hz rated
transformers on 50 Hz service. Without special designs,
higher losses and greater heat
rise will result. Operating 60 Hz transformers at higher
frequencies may simply provide
less voltage regulation.

what is the difference between MCB & MCCB

3 Answers  

---

why transformer do not rotate?

3 Answers  

---

In CT,which terminal(s1,s2) need to be grounded?

2 Answers  

---

why our power production in multiples of 11.

2 Answers   ABB, Infosys,

---

Why induction motor can not be operated at synchronous speed?? what would happen if it is operated at synchronous speed??

5 Answers  

---

What is the percentage loss for aluminium wire for HT line more than 11KVa

0 Answers  

---

advantage of motor design on higher power factor . normally motors are designed for .8 power factor. what is advantage of designing at .88 power factor

0 Answers  

---

What is Exitation voltage and Exitation current? What is the function of these in Alternator?

2 Answers   TC, Tisco,

---

What is RTCC panel and why it is required

31 Answers   RTCC, Tivoli Grand,

---

what is the maintain in ACB,VCB,MCB,MCCB breakers?

4 Answers   CTS,

---

WHy neutral to ground trips when neutral touches the ground

1 Answers  

---

In 110V DC supply,if a closed circuit gets open, How can we identify the voltage which is measured after the resistor(4KOhm) which is open with negative.it shows 55V +ve when measured, also the actual positive source is 55V +ve .Because there is no voltage drop in open circuit. How can we identify whether this is the voltage which is series with the resistor or the DC source direct +ve.

1 Answers   GE,

---