Calculate the cooling duty, H required to condense and cool acetone from 100 degree Celsius to 25 degree Celsius at atmospheric pressure. The heat of vaporization for acetone at its normal boiling point is 30.2 kJ / mol. The boiling point of acetone at atmospheric pressure is 56 degree Celsius. The flowrate of acetone through the condenser is 100 mol / s = N. Value of sensible heat needed to increase the temperature of acetone in liquid form from 25 to 56 degree Celsius is 4.06 kJ / mol. Value of sensible heat needed to increase the temperature of acetone in vapor form from 56 to 100 degree Celsius is 3.82 kJ / mol. Unit of H is kJ / s.

1 Answers  

---

how to find a liquid flow's direction in a closed pipe by merely seeing it(without pressure gauges)...

4 Answers  

---

What are some common problems associated with dense phase pneumatic conveying?

0 Answers  

---

Hi, I am preparing for Indian Forest Service (UPSC). Can you please help me to get previous years question papers (Chemcial Engineerign) (atleast 5).

1 Answers  

---

how many TDS & TOTAL HARDNESS, PH of drinking water is recomanded for human being use.

4 Answers  

---

all subject of chemical engg

1 Answers  

---

Question 37 - Calculate the bubble temperature T at P = 85-kPa for a binary liquid with x(1) = 0.4. The liquid solution is ideal. The saturation pressures are Psat(1) = exp [ 14.3 - 2945 / (T + 224) ], Psat(2) = exp [ 14.2 - 2943 / (T + 209) ] where T is in degree Celsius. Please take note that x(1) + x(2) = 1. Please take note that y(1) + y(2) = 1, y(1) = [ x(1) * Psat(1) ] / P, y(2) = [ x(2) * Psat(2) ] / P, * is multiplication. P is in kPa.

1 Answers  

---

Under what circumstances are vortex flowmeters the most accurate?

0 Answers  

---

What is the difference beteween in specticle blind and slip plate

1 Answers   ENI,

---

i badly need a chemical process details for making a project...plz help me out......i m a btech final yr chemical engg student in a govt univ,and we have to make a detailed project on any chemical process with contents like...intro,kinetics , material balance,thermodynamics,process layout,process design,physical conditions,plant location,cost estimation etc.............if any one could help me i will never forget hi thankless work and always try to help u in whatever u ask.............

1 Answers   HPCL,

---

What is Pinch Technology?

6 Answers  

---

PROCESS CONTROL - EXAMPLE 6.2 : A stream with volumetric flow rate Q enters a cylindrical tank and a stream with volumetric flow rate q exits the tank. The fluid has a constant heat capacity and density. There is no temperature change or chemical reaction occurring in the tank. Develop a model for determining the height of the tank, h. Let V is the volume, A is the cross sectional area, r is the density, m is the mass, where V and A are for the tank, r and m are for the fluid. The rate of mass of fluid accumulation, dm / dt = (Q - q) r. Prove the model to be dh / dt = (Q - q) / A.

1 Answers  

---