Answer / g.ramasubramanian

If suppose any body face the above question then you must
answer with out any hesitation. That answer is ,''

I have very strong analytical skills.
I will try to solve the problem's source not
the problem.
I will never hesitated to accept my failures.
Through that i will never fails to learn .
I am very good listener, if someone is speaking
with me about something.

My Negative points are ,

Still i have to search. Pls. you can tell me if
any negative points noted during this session.

Answer / vaishali

My Positive Points:-

Strong analytical skill
Problem solving skill
Hard Worker

My negative Points:-

Sometimes I become straight forward.
Emotional

Answer / nikita c.

NEGATIVE POINT-I always look forward for a quality work
becoz of which sometimes it takes more time to complete d
work...but to overcome this, i hv started working upon
it....as i believe tht thr is always scope for
improvement....
I hv started keeping track or record of each and evry tasks
which are 2 b completed by me..nd searching for
alternatives which will help me out to complete d work well
in time without loosing its Quality...........

Answer / sandeep khatak

My possitive point is:-i am very smart worker

i have good communication skills
my possitive attitude
my possitive point is i always think possitive
i have good management skills

negative- sometime during work i can not care about my self.
i get early angry
iam impatient about my result.

Answer / vijay

+ve point
\every work i use to take with confidence and give best result to it .
\i always be patience in handling the work
\i share my ideas with others
\i used improve the things wnenever i make mistakes
-ve point
\ihave one weakness , that is am a sensitive person , i take things to heart and get too disappointed when things are done wrong way .......and to overcome this weakness i always say to myself , "dontt worry , do better next time and dont repeat mistakes" and with that i always try to do best next time...

Answer / pushkar singh rawat

best ever answer
positive :-
i am a organize person , i like to know what i am doing for the day or for the week by doing so i can organize my time and work better

negative :-
my English ability is my weakness/negative point i hesitate sometime when i speak in english but i know it's temporary problem because i am working hard on it, and i defiantly improve my english communotation skills as soon as possible

Answer / gufran

POsitive points:- Team Player,Good communcator.
Very Practical,co-operative
Works in Cordination

Negative points:- Transparent to the seniors and Juniors
Straight Forward
Never tolerate Un-ehtical Work

Answer / vikas

My strength is that I am hard worker and self motivated person and if I have any work or project then for that first I decide to make a proper plan and schedule then start it. And I am good in team work and I like team work.

My weakness is that I can not leave any work before its completions. And easily I believe everyone.

Answer / siddharth

positive: My ability to overcome others negative thoughts on
me and taking up any challenges that were thrown on me and
finishing those challenges is my positive points.


negative: My negative is getting under pressure when unable
to complete a job and needs constant encouragement when
trying to finish tough jobs.

Answer / nagesh kushwaha

1-good comunication.
2-making new friends.

what is up linl?

3 Answers  

Which of the following protection methods is NOT supported by FlexiHoppers with FIU19(E)?

0 Answers   NSN,

when does transistor has power dissipation

7 Answers   BARC, HP,

Define what do you mean by donor and acceptor impurities?

0 Answers  

What are the different construction techniques in electronics?

0 Answers  

16:16::25:? A]25 B]16 C]32 D]1

2 Answers   Bhel, MahaGenco, Syntel,

What are the disadvantages of continuous gating signal?

0 Answers  

describe the functioning off all the 40 pins of 8085 processor?

0 Answers  

(1) Instrument is a device for determining (a) the magnitude of a quantity (b) the physics of a variable (c) either of the above (d) both (a) and (b) (2) Electronic instruments are preferred because they have (a) no indicating part (b) low resistance in parallel circuit (c) very fast response (d) high resistance in series circuit (e) no passive elements. (3) A DC wattmeter essentially consist of (a) two ammeters (b) two voltmeters (c) a voltmeter and an ammeter (d) a current and potential transformer (4) Decibel is a unit of (a) power (b) impedance (c) frequency (d) power ratio (5) A dc voltmeter may be used directly to measure (a) frequency (b) polarity (c) power factor (d)power (6) An accurate voltmeter must have an internal impedance of (a) very low value (b) low value (c) medium value (d) very high value (7) The insulation resistance of a transformer winding can be easily measured with (a) Wheatstone bridge (b) megger (c) Kelvin bridge (d) voltmeter (8) A 100 V voltmeter has full-scale accuracy of 5%. At its reading of 50 V it will give an error of (a) 10% (b) 5% (c) 2.5% (d) 1.25% (9) You are required to check the p. f. of an electric load. No p.f. meter is available. You would use: (a) a wattmeter (b) a ammeter, a voltmeter and a wattmeter (c) a voltmeter and a ammeter (d) a kWh meter (10) The resistance of a field coil may be correctly measured by using (a) a voltmeter and an ammeter (b) Schering bridge (c) a Kelvin double bridge (d) a Maxwell bridge (11) An analog instrument has output (a) Pulsating in nature (b) Sinusoidal in nature (c) Which is continuous function of time and bears a constant relation to its input (d) Independent of the input quantity (12) Basic charge measuring instrument is (a) Duddel's oscillograph (b) Cathode ray oscillograph (c) Vibration Galvanometer (d) Bailastic Galvanometer (e) Battery Charging equipment (13) A.C. voltage can be measured (using a d.c. instrument) as a value obtained (a) by subtracting the d.c. reading from it's a.c. reading. (b) Using the output function of the multimeter (c) By using a suitable inductor in series with it (d) By using a parallel capacitor with it (e) None of the above (14) A moving coil permanent magnet ammeter can be used to measure (a) D. C. current only (b) A. C. current only (c) A. C. and D. C. currents (d) voltage by incorporating a shunt resistance (e) none of these (15) Select the wrong statement (a) the internal resistance of the voltmeter must be high (b) the internal resistance of ammeter must be low (c) the poor overload capacity is the main disadvantage of hot wires instrument (d) the check continuity with multimeter, the highest range should be used. (e) In moving iron voltmeter, frequency compensation is achieved by connecting a capacitor across its fixed coil. (16) Which of the following instrument is suitable for measuring both a.c. and d.c. quantities. (a) permanent magnet moving coil ammeter. (b) Induction type ammeter. (c) Quadrant electrometer. (d) Moving iron repulsion type ammeter. (e) Moving iron attraction type voltmeter. (17) Swamping resistance is used in moving coil instruments to reduce error due to (a) thermal EMF (b) temperature (c) power taken by the instrument (d) galvanometer sensitivity. (18) A power factor meter is based on the principle of (a) electrostatic instrument (b) Electrodynamometer instrument (c) Electro thermo type instrument (d) Rectifier type instrument. (19) A potentiometer recorder is used for (a) AC singles (b) DC signals (c) both (a) and (b) (d) time varying signals (e) none of these. (20) Transformers used in conjunction with measuring instruments for measuring purposes are called (a) Measuring transformers (b) transformer meters (c) power transformers (d) instrument transformers (e) pulse transformers. (21) Leakage flux in an electrical machine is measure by (a) Ballistic galvanometer (b) Flux meter (c) Either (a) or (b) (d) Vibration galvanometer (e) CRO (22) A C.R.O. is used to indicate (a) supply waveform (b) magnitude of the applied voltage (c) B.H. loop (d) all of these (e) Magnitude of the current flowing in it. (23) An oscillator is a (a) an amplifier having feedback network (b) a high gain amplifier (c) a wide band amplifier (d) a untuned amplifier (e) None of these (24) Distortion can be measured by (a) Wave meter (b) Digital filters (c) Wein bridge circuit (d) Bridge T filter circuit (25) Series connected Q- meter is preferable for measurement of components having (a) high impedance (b) low impedance (c) both (a) and (b) (d) high frequency (e) low capacitance (26) A potentiometer is (a) an active transducer (b) a passive transducer (c) a secondary transducer (d) a digital transducer (e) a current sensing transducer (27) The basic components of a digital voltmeter are: (a) A/D converter and a counter (b) A/D converted and a rectifier (c) D/A converter and a counter (d) Ramp generator and counter (e) Comparator (28) Which of the following electrical equipment cannot convert ac into dc (a) diode (b) converter (c) transformer (d) mercury arc rectifier (29) Voltage measurement are often taken by using either a voltmeter or (a) an ammeter (b) an ohmmeter (c) an oscillator (d) a watt-meter (30)The electric device which blocks DC but allows AC is called: (a) capacitance (b) inductor (c) an oscilloscope (d) a watt-meter (31 ) The range of an ammeter can be extended by using a (a) shunt in series (b) shunt in parallel (c) multiplier in series (d) multiplier in parallel (32)A device that changes one form of energy to another is called (a) rheostat (b) oscillator (c) transducer (d) varicap (33) Aquadag is used in CRO to collect (a) primary electron (b) secondary electron (c) both primary and secondary (d) none of above (34) A vertical amplifier for CRO can be designed for (a) only a high gain (b) only a broad bandwidth (c) a constant gain time bandwidth product (d)all of the above (35) One of the following is active transducer (a) Strain gauge (b) Selsyn (c) Photovoltic cell (d) Photo emissive cell (36) The dynamic characteristics of capacitive transducer are similar to those of (a) low pass filter (b) high pass filter (c) band pass filter (d) band stop filter (37) Thermocouples are (a) passive transducers (b) active transducers (c) both active and passive transducers (d) output transducers (38) The size of air cored transducers as compare to iron core counter part are (a) bigger (b) smaller (c) same (39) From the point of view of safety, the resistance of earthing electrode should be: (a) low (b) high (c) medium (d) the value of resistance of electrode does not effect the safety (40) In CRT the focusing anode is located (a) between pre accelerating and accelerating anodes (b) after accelerating anodes (c) before pre accelerating anodes (d) none of above (41) Which transducer converts heat energy into electrical energy (a) I. V. D. T. (b) thermocouple (c) photoconductor (d) none of the above (42) Which of photoelectric transducer is used for production of electric energy by converting solar energy (a) photo emission cell (b) photo diode (c) photo transistor (d) both (b) and (c) (43) Which of the following instruments consumes maximum power during measurement? (a) induction instruments (b) hot wire instruments (c) thermocouple instruments (d) electrodynamometer instruments (44) Which of the following meters has the best accurancy (a) moving iron meter (b) moving coil meter (c) rectifier type meter (d) thermocouple meter (45) The function of the safety resistor in ohm meter is to (a) limit the current in the coil (b) increase the voltage drop across the coil (c) increase the current in the coil (d) protect the battery (46) Which of the following instruments is free from hysteresis and eddy current losses? (a) M.l. instrument (b) electrostatic instrument (c) electrodynamometer type instrument (d)all of these (47) The dielectric loss of a capacitance can be measured by (a) Wien bridge (b) Owen bridge (c) Schering bridge (d) Maxwell bridge (48) Reed frequency meter is essentially a (a) recording system (b) deflection measuring system (c) vibration measuring system (d) oscillatory measuring system (49) In measurements made using a Q meter, high impedance elements should preferably be connected in (a) star (b) delta (c) series (d) parallel (50) A digital voltmeter measures (a) peak value (b) peak-to-peak value (c) rms value (d) average value

2 Answers   BSNL, MCI, NPCIL, Sail,

Explain how to measure frequency without cro?

0 Answers  

What is a pointer and does Java support pointers? What is the difference between a JDK and a JVM?

0 Answers  

Plz send me some sample papers on OCES papers. I am appearing in OCES/DGFS-2009.Plz inform me by my emailid- subhabrata03851@gmail.com

0 Answers