On load tap changer (OLTC) explode? Transformer Vector group: Ynd11 Rated Power: 353MVA Rated Current: 693A Voltage:294/20KV OLTC Type: T III Y1000 110/c 12193w Max Operation Current: 295A Step Voltage: 550V Arrangement in Tx windings: Y Connection Problem: Damage of Unit 1 Generator Transformer On Load Tap Changer (OLTC) Description of Incident: 9.00 a.m. :- Generator No Load test on excitation system started 10.30 a.m :- Carried out AVR change over test 11.30 a.m :- Preparation for Generator Manual Synchronizing test 12.00 a.m :- Manual Synshronizing test started. Observed incoming generator voltage higher than running voltage. CECR operator operated Generator Transformer OLTC to bring down the incoming generator voltage 12.03 a.m :-Generator Transformer abnormal alarm operated at Gen.Control Desk (CECR) CECR operater at Generator transformer bay informed that the transformer oil splashed out from OLTC. CECR operater informed that he heard explosion inside OLTC. Observed Oil level & Oil Flow alaram operated at Tranformer local annunciator. 12.05 am :- CECR operator 'Open Gen Field Breaker” 12.10 a.m. :- Elec1 team inspected the OLTC and found the OLTC rupture disk was broken and oil spilled at OLTC area. - Elec1 found the OLTC top cover bulging. Do anyone know why and possibility cause happen in this OLTC.

9 Answers  

---

while doing high voltage test on 11kv/433 distribution transformer why we only give 28 kv on hv side and 3kv on lv side for power transformers what is the value what factors it depends

0 Answers   Enercon,

---

IF 8255 CONTROL WORD IS 94H,Tell the chip port work mode ?

0 Answers  

---

why we used star delta starter for above 5hp motors

2 Answers  

---

how can i determine the KVA/MVA rating of transformer precisely?? is there any standard test?????

0 Answers  

---

---

distribution transformer de-rating formula on over limit iron losses  

0 Answers   IESCO,

---

What is best method of Calculating Short Circuit current in power system network.

1 Answers  

---

what is the thumb rule or formula for cable size and current ratings

1 Answers  

---

what is the responsibilities of electrical project engineer?

2 Answers  

---

Can anyone tell me how a 12v battery is transformed to 20,000v at the spark plug

6 Answers  

---

4.In which type of welding is a pool of molten metal used.....

3 Answers   ISRO, SSC, Vizag Steel,

---

Wtat is vaccum currcuit breaker.define with cause of used.and where be use it Devise .

1 Answers  

---