Answer / prachi

In case of Grilled LIFT(not fully automatic)
1) To verify that the lift is working Properly
2) To verify that the lift is able to reach to the desired
number of floor pressed on the digital window.
3) To verify that the lift is able to reach to the desired
number of floor and work properly.
4) To verify that the the lift should be in
Same state when the floor preesed on
diigital window is same as the sate of
the lift ."
5) To verify that the Lift should give sound when number of
person > max wt carried.
6)To verify that the Lift should follow the
proper sequence of called."
7) To verify that the number displayed in Window is
Visible and correct.
8)To verify that the number displayed in Window is Visible
and correct.
9)To verify that the Fan amd Alarm button are working fine.
10)To verify that the Lift should be stop and locked when
it is followed by the proper "Off".
11)To verify that the Gate of the lift should not open
untill it reaches to the desired Floor.

Answer / trinadh

first we should check whether lift is opening when we stand
infront of it and closes when we entered inside.
then we should verify whether buttons are clearly visible
and easy to operate.
we should verify when we press the button its taking us
there

Explain the syntax testing?

0 Answers  

---

write a test case for a pen and paper regarding writing.

11 Answers   HCL, Wipro,

---

What is p0,p1,p2,p3 in software tesing

5 Answers  

---

Can anybody tell test cases for the following condition? In a railway reservation form, 4 types of ticket ranges are there like a) age up to 3, NO TICKET. b) age up to 7, HALF TICKET. c) age up to 60, FULL TICKET. d) age from 61, SENIOR CITIZEN QUOTA. if you enter age into the text box the relevant message should be displayed..... Eg. FULL TICKET.

3 Answers  

---

write test cases for flipkart.

0 Answers  

---

how we canwrite a test case on computer?

5 Answers   IBM, Satyam,

---

A wholesaler sells printer cartridges. The minimum order quantity is 5. There is a 20% discount for orders of 100 or more printer cartridges. You have been asked to prepare test cases using various values for the number of printer cartridges ordered. Which of the following groups contain three test inputs that would be generated using boundary value analysis?

0 Answers  

---

ATM REQUIREMENT TO BE TRANSLATED INTO TEST PLAN AND TEST CASES ATM REQUIREMENT AS FOLLOWS: Requirements Statement for Example ATM System The software to be designed will control a simulated automated teller machine (ATM) having a magnetic stripe reader for reading an ATM card, a customer console (keyboard and display) for interaction with the customer, a slot for depositing envelopes, a dispenser for cash (in multiples of $20), a printer for printing customer receipts, and a key-operated switch to allow an operator to start or stop the machine. The ATM will communicate with the bank's computer over an appropriate communication link. (The software on the latter is not part of the requirements for this problem.) The ATM will service one customer at a time. A customer will be required to insert an ATM card and enter a personal identification number (PIN) - both of which will be sent to the bank for validation as part of each transaction. The customer will then be able to perform one or more transactions. The card will be retained in the machine until the customer indicates that he/she desires no further transactions, at which point it will be returned - except as noted below. The ATM must be able to provide the following services to the customer: A customer must be able to make a cash withdrawal from any suitable account linked to the card, in multiples of $20.00. Approval must be obtained from the bank before cash is dispensed. A customer must be able to make a deposit to any account linked to the card, consisting of cash and/or checks in an envelope. The customer will enter the amount of the deposit into the ATM, subject to manual verification when the envelope is removed from the machine by an operator. Approval must be obtained from the bank before physically accepting the envelope. A customer must be able to make a transfer of money between any two accounts linked to the card. A customer must be able to make a balance inquiry of any account linked to the card. A customer must be able to abort a transaction in progress by pressing the Cancel key instead of responding to a request from the machine. The ATM will communicate each transaction to the bank and obtain verification that it was allowed by the bank. Ordinarily, a transaction will be considered complete by the bank once it has been approved. In the case of a deposit, a second message will be sent to the bank indicating that the customer has deposited the envelope. (If the customer fails to deposit the envelope within the timeout period, or presses cancel instead, no second message will be sent to the bank and the deposit will not be credited to the customer.) If the bank determines that the customer's PIN is invalid, the customer will be required to re-enter the PIN before a transaction can proceed. If the customer is unable to successfully enter the PIN after three tries, the card will be permanently retained by the machine, and the customer will have to contact the bank to get it back. If a transaction fails for any reason other than an invalid PIN, the ATM will display an explanation of the problem, and will then ask the customer whether he/she wants to do another transaction. The ATM will provide the customer with a printed receipt for each successful transaction, showing the date, time, machine location, type of transaction, account(s), amount, and ending and available balance(s) of the affected account ("to" account for transfers). The ATM will have a key-operated switch that will allow an operator to start and stop the servicing of customers. After turning the switch to the "on" position, the operator will be required to verify and enter the total cash on hand. The machine can only be turned off when it is not servicing a customer. When the switch is moved to the "off" position, the machine will shut down, so that the operator may remove deposit envelopes and reload the machine with cash, blank receipts, etc. The ATM will also maintain an internal log of transactions to facilitate resolving ambiguities arising from a hardware failure in the middle of a transaction. Entries will be made in the log when the ATM is started up and shut down, for each message sent to the Bank (along with the response back, if one is expected), for the dispensing of cash, and for the receiving of an envelope. Log entries may contain card numbers and dollar amounts, but for security will never contain a PIN.

1 Answers  

---

testcases for waterbottle

4 Answers   L&T, Wipro,

---

How to write test scenarios for a Web application, with an example?

2 Answers  

---

write a test cases for 2- way swtich?

5 Answers   CTS,

---

Write the functional,system test case for a electric bulb which have two electric switches.

4 Answers   Manhattan,

---