Answer / badhehm

Major is maintain specific consumption of power
not follow up SOP
unsafe practice

Answer / sundar

equipment failure, 

The water is superheated steam at 440 degree Celsius and 17.32 megapascals. Estimate the enthalpy of the steam above. From the steam table for water at 440 degree Celsius, enthalpy of steam, h at 18 megapascals is 3103.7 kilojoules per kilogram and at 16 megapascal is 3062.8 kilojoules per kilogram. Assume that h = mP c where P is pressure; m and c are constants at fixed temperature with small differences in P.

1 Answers  

---

BIOCHEMICAL ENGINEERING INSTRUMENTATION - EXAMPLE 29.4 : The resolution of separation, Rs for chromatography is given by the formula Rs = (difference in retention time) / (average width at the base). In a chromatogram, 3 peaks a, b and c are found. Average widths W at the bases of the solutes are : Wa = 20 s, Wb = 40 s, Wc = 30 s. Resolutions of separation, Rs for solutes b and c in comparison to a are 2 and 4 respectively. The differences in retention times T for b and c in comparison to a are (Tb - Ta) and (Tc - Ta), Ta = Tc - Tb : (a) Form 2 equations involving Rs as a function of Wa, Wb, Wc, Ta, Tb and Tc. (b) Find the values of Ta, Tb and Tc.

1 Answers  

---

ACCOUNTING AND FINANCIAL ENGINEERING - EXAMPLE 34.25 : (a) If an engineering company has a policy to maintain A % debt ratio, it will limit its total debt B, to A % of all company assets with total assets C. Find the value of A as a function of B and C. (b) An engineering consultancy that designs biochemical processing plants has a beginning balance in a bank of value D. The interest paid by the bank to the consultancy for the saving is E. The consultancy withdraws F amount of money from the bank to cover the project cost. (i) Calculate the end balance in a bank of the consultancy by using the symbols of D, E and F etc. (ii) Find the value of the principal due to E and F.

1 Answers  

---

what is the hearth and arch pressure in furnace?

0 Answers   IFFCO,

---

What does extreme points in VLE curve represents??

4 Answers   Reddy Labs, Reliance,

---

---

ACCOUNTING AND FINANCIAL ENGINEERING - EXAMPLE 34.31 : In a biochemical engineering company, let the actual revenue generated = A, actual cost incurred = B. According to the standard budget, the revenue generated = C, cost incurred = D. (a) Find the profit according to : (i) actual situation; (ii) standard budget. (b) Calculate the Variance Due to Price and Efficiency in : (i) revenue generated; (ii) cost incurred; (iii) profit. (c) If E > F where > represents : more than, find the 4 pairs of values of E and F in favorable conditions.

1 Answers  

---

What are the different ways in which solids can be blended?

0 Answers  

---

What is the chemical name of Silica gel?

2 Answers  

---

Question 64 – According to a heuristic of chemical engineering plant design, assume a pressure difference dP = 4 psi for each 10-ft rise in elevation. A pump is needed to pump liquid from a storage tank at a lower elevation to a heating tank at a higher elevation with the elevation difference of 60 ft. (a) Find the pressure loss due to such elevation. (b) If the required minimum inlet pressure to the heating tank is 9 psi, with 1 control valve is installed between pump and heating tank, what is the dP minimum required for the control valve and the entrance to the heating tank when the heuristic mentions that at least 10 psi is required for the control valve? (c) The pressure at the inlet of the pump is 8 psi and the flowrate of the liquid produces pressure head of 50 psi. What is the total pressure produced by the pump? (d) Assume a pipeline dP of 2 psi / 100 ft for liquid flow in a pipe according to heuristic, what is the approximate maximum length of the pipe in ft that can be installed between the pump and the heating tank?

1 Answers  

---

what is isochronus and droop speed?

0 Answers  

---

ELECTRICAL TECHNOLOGY - EXAMPLE 16.3 : In the design of a solar power system steps of calculations below are followed : (a) The power output of the inverter of the solar panel is 100 watts. What is the power input, Pin to the inverter when the efficiency of the inverter is 50 %? (b) If the rated power of the inverter is 300 watts, how many inverter is needed for the solar panel? (c) Charge controller of V = 12 volts is used to supply power to the inverter. What is the input current I to the inverter? (d) If the charge controller capacity is 10 A, how many charge controllers are needed? (e) If a biochemical mixer consumes 100 watts, running for 2 hours per day, what is the energy consumption in kilowatt hour per day? (f) What is the input energy needed when the efficiency of the inverter is 50 %? (g) If your area receives 2.88 hours of full sunlight per day, how much energy, in kilowatt hour can be produced per day when one solar panel can produce 20 watts of power? (h) If you know that you have to produce total energy as the answer for (f), how many solar panels are needed? (i) Each V = 12 V battery has 5 ampere hours. If the total energy needed is in answer (f), then how many batteries are needed to run the biochemical mixer if without sunlight for 3 days?

1 Answers  

---

distillation types (vacuum, azeotropic, steam, extractive)

1 Answers  

---