Answer / sudhakar g

Basically first they will ask you
1) current calculation formula
I=w*1000/p.f*240v
2)what are the batteries used for UPS?
*SMF-sealed maintainence free
*Turbulance battery
3)how many battery will used for like 2.5KVA ups?
*4nos

what is difference between mccb,mcb,elcb,pccb

7 Answers  

---

what is mean by potential and potential free contacts

2 Answers  

---

why ct ,cvt should be stored in a vertical position?

0 Answers   Balco,

---

TYPE'S OF BREKAR ,WHAT IS TRANSFORMAR & SAFTY. STARTER DOL & STAR DELTA STARTER.

0 Answers   Amtek,

---

is there any current flows in our body?

4 Answers  

---

Why celing fans will rotate slowly after some days.?

2 Answers  

---

In transformers Which type of connection is preferred for harmonics to be minimum. primary : secondary star without neutral:open delta star with neutral :open delta star without neutral: delta star with neutral : delta explain why

1 Answers   Genco,

---

What are the conditions to be satisfied before connecting two DC generators in parallel?

9 Answers   Bhel, Godrej,

---

How can Inductive load reduce the line voltage of HV transmission line and vice versa Capacitive load?

1 Answers  

---

What is the unit of inertia constant of rotating machines? Which has more inertia constant between turboalternator and hydroaltermanor and why?

2 Answers  

---

On load tap changer (OLTC) explode? Transformer Vector group: Ynd11 Rated Power: 353MVA Rated Current: 693A Voltage:294/20KV OLTC Type: T III Y1000 110/c 12193w Max Operation Current: 295A Step Voltage: 550V Arrangement in Tx windings: Y Connection Problem: Damage of Unit 1 Generator Transformer On Load Tap Changer (OLTC) Description of Incident: 9.00 a.m. :- Generator No Load test on excitation system started 10.30 a.m :- Carried out AVR change over test 11.30 a.m :- Preparation for Generator Manual Synchronizing test 12.00 a.m :- Manual Synshronizing test started. Observed incoming generator voltage higher than running voltage. CECR operator operated Generator Transformer OLTC to bring down the incoming generator voltage 12.03 a.m :-Generator Transformer abnormal alarm operated at Gen.Control Desk (CECR) CECR operater at Generator transformer bay informed that the transformer oil splashed out from OLTC. CECR operater informed that he heard explosion inside OLTC. Observed Oil level & Oil Flow alaram operated at Tranformer local annunciator. 12.05 am :- CECR operator 'Open Gen Field Breaker” 12.10 a.m. :- Elec1 team inspected the OLTC and found the OLTC rupture disk was broken and oil spilled at OLTC area. - Elec1 found the OLTC top cover bulging. Do anyone know why and possibility cause happen in this OLTC.

9 Answers  

---

Differentiate AC and Dc resistance

0 Answers  

---