Answer / rajiv

Raw meterrial storage plant is very
ceritical.Electronic,Phrma & FMCG plant will maintanied 45
to 55% in this resion when humidity is less than 30 so
material is dryness & when humidity is greater than 55 so
material will mositure

1. What means HART communicator / where it is used / how to use it? 2. Types of Thermocouples and its temperature ranges / output of thermocouple? 3. Types of RTDs and its temperature ranges / output of RTD? 4. Idea about Temperature Transmitters? 5. Difference between Analog and Digital signals? 6. Difference between “2 wire” and “4 wire” system / instruments? 7. Difference between “Potential” and “Potential free” contact? 8. Types of flow meters / transmitters? 9. Types of level transmitters? 10. Difference between “Power/Control” cable and “Instrument” cable? 11. What means “shield” and “screen” in cables / how it is useful? 12. Draw a schematic of closed loop circuit of flow / level / pressure / temperature? 13. Idea about calibration of Control valve / positioned / I/P? 14. How to bypass a digital/analog signal in PLC/DCS by hardwire and software?

6 Answers   JSL,

---

Good Evening all.My question is - For a feed water line to an equipment if i need to measure the flow we will use orifice /magnetic/vortex depend on cost/spec.If i need to measure a ''Alarm''signal and ''Interlock'' from one point i think we can use orifice type in one location with 2 different tapping points - one for alarm and one for an interlock to flow valve..If in case i need to have both these signals(Alarm & interlock) from magnetic flow meter,is it possible??will 2 seperate sensors will be located inbuilt r we can program it ??..i thk we can have one transmitter with these 2 signals...need to know any technical issues are there?pls clarify

3 Answers  

---

Difference between dcs and plc including date processing and architecture.

0 Answers  

---

how to measure level under ground tank ? which type of transmitter very accuracy ?

3 Answers   Biocon,

---

What is the difference between uv and ir scanners? and what is the workig principle of both

0 Answers  

---

How to calibration a control valve?

0 Answers  

---

how do calibrate the valves.. with clear manual

0 Answers   Essar,

---

how to calculate flow range in DP tx

1 Answers   Karnataka Power,

---

Can a pneumatic control valve work without positioner?

4 Answers   SMC,

---

What is the formula to know the error of weighfeeder after having drop test.

3 Answers  

---

WHICH INSTRUMENT USED TO CALIBRATE CONTROL VALVE?

23 Answers   Exxon Mobil, Honeywell,

---

How to connect another 24 volt dc power supply in circuit when previous power supply has become weak.what is the connection?

2 Answers   Bhole Baba Dairy Industries,

---