How to improve the power factor from 0.8 to 0.98? Also tell
me cost vs benefit analysis.
Answers were Sorted based on User's Feedback
Answer / vinod meena
by adding the capacitor bank in the circuit...
Is This Answer Correct ? | 11 Yes | 1 No |
Answer / mubashar hussain arshad
we cam improve the power factor by capacitors... by
improving power factor the KVA rating of aquipments become
small so we can reduce the cast of equipments.... so by
improving the power factor one can get cost benefits and
size of equitments smaller
Is This Answer Correct ? | 2 Yes | 1 No |
What is the purpose of reactor in over head transmission line.Can you any explain it.
2 Answers Dr Reddys, L&T, Reddy Labs,
what will be the effect of leading power factor on turbogenerator (and system) that is running parallel with other TG.
Our Alternator nameplate specifies a power factor of 0.8. When the Alternator is on light load, the bus bar voltage rises to 11240 volts, whereas the standard value is 10500 volts. Is it ok to increase the power factor to 0.85 or 0.9. I am afraid because the power factor on the name plate is only 0.8 ?
why ac signals are sinosuidal
What happent when a AC motor(no break and starters ) stop and suddenly start . ? Starting current low or high?? Why?
How can we prevent the (Home)inverter supply flow to the main supply line?
i want use the cable size 16cx4 core aluminium usege watts 240x2000w this cable size is correct?
how to calculate efficiency of voltage and current controlled welding transformer?
what is basic difference betmeen normal & flame proof motor??
Why reactive power is needed in a power system? How is it being absorbed or delivered by alternators? For reactive power control we are changing excitation but reactive power absorbing or delivering related to stator. How these two are interlinked? i want a detailed explanation with necessary expressions and figures?
in the directional overcurrent and earthfault protection,normally we are setting the angle 45 deg lead for phase fault overcurrent and -45 deg lead for earthfault fro forward direction.but both the fault are operating on the same angle region only.why?how the relay will response?
how starting current in motor is reduced in case of motor in star connection.