Answer / raji g

pulverisation is one of the process in thermal power plant.
pulverisation is resize the big size and uneven size of
coals into even size of coals. this process improve the
power from the coals..and also it is easier to burn the
coals easily get the required amount of heat in that
pulvarised coal..

Answer / pandeyrahul

surface area increased by pulverizing which results in
easier burning

what is the voltage of insulation megger that should be used for measuring the resitance of 66kv equipments.

3 Answers   DEWA,

---

Proviiding the Dedicated N earth and individual Body Earths ,Finally these all looped /Now my Question :- will it not harm in case of Transformer Fault current flows in Dediacted N Earthing to Looped Body Earthing.

0 Answers  

---

What is EOL?

1 Answers  

---

I COMPLITED MY B.TECH AND 10TH CLASS WITH 70%MARKS BUT 12TH CLASS 55%MARKS..CAN I GET INDIAN RAILWAY RECUREMENT EXAMINATION?

0 Answers   UPSC,

---

what is the Connected Load (kW) or Contract Demand (kVA)of mahindra nasik plant??

0 Answers  

---

what is the diff between earth leakage relay and earth fault relay?

7 Answers  

---

Shunt reactor is used in EHV Transmission line for..............?

2 Answers   NTPC,

---

Why two main buses and one transfer bus scheme not using for 400kV switchyard

5 Answers  

---

An 8 pole, 50 Hz, 3-phase IM is loaded to a poing where pull out torque will occur. The rotor resistance per phase is 0.3 ohm and motor stalls at 650 rpm. The rotor frequency at maximum torque point is A 3.33% B 4.44% C 5.55% D 6.66%

1 Answers  

---

What is the LUX

2 Answers  

---

why the supply power frequency is 50hz in india? where as it is 60hz in US?

4 Answers  

---

I've descovered that when the earth wire in a domestic electrical installation is not connected back to the board (ground) a voltage of between 9-24v is is found to be present in the earth wire. When connected at the board there is no voltage - is this normal and why does it happen?

3 Answers  

---