What are the limiting factor for controlling maximum hot
point temperature within a hydrogen and water cooled generator?
Answer / ramesh.immd.mppgcl
Cold gas temperature is limiting factor for controlling the
max.hot point temperature within a hydrogen and water cooled
generator when the generator running within its designed
parameters.
Is This Answer Correct ? | 2 Yes | 0 No |
How can we calculate the capacity of the capacitor bank attached with the Main panel, when we know the capacity of the panel installed in KVA Rating?
Instrument connected to a single phase supply
what are the components in electrical control panel (for example: 415V, 3-ph, panel to operate utility and 3-ph DG set).
generally in LT and MV motors we are using 3.5Coresx16,25,35,50 etc cable for supply.although motors is earthed at two point and having all protection.then why we are using that 1/2 core for earthing the motors.while in HT cable we are using only 3core cable for motor supply.generally lt and mv motors are delta connected and ht motors having star connection.whethere it is having any relation with winding connection( star or delta).all motors i am talking about are dol only.can anybody solve my confusion.thanks...
why the desirable efficiency for a motor is 60%, but in case of transformer, it is above 90%?
The electrical energy required to raise the tempreture of a given amount water is 200 kwh. If the heat losses are 20%, the energy required is?
Can CT Secondary left open circuited and why(reason)?
What’s electric traction?
why autotransformers are not safe for supplying low voltage from a high voltage source?
define transformer
state the working principle of incondenscent tube?
How can we get a Neutral from a three phase suply? If we meet all three phases at a point to take neutral then why dont thay get sparked?