Answer / k.prakashchandra

Fusing current for a round wire is approximately is equal to
k d^3/2 Amps.d=dia in mm, k=80 for copper, 12.8 for tin and
59 for Al.Fusing factor =minimum fusing current/current
rating of fuse.This value should be more than one and is
usually two.

Answer / karthik_elec

fuse is calculating with fuse factor, for example,
if u want to protect one equipment, that equipment taking 10 amps, if u put 10 amps fuse, that fuse will operate in 14.5 amps 4 hrs continues running, fuse factor is 1.45, fuse operating current = 1.45(fuse factor)*10(fuse rating). that means 14.5A 4hrs continues running. this is from IEC (INTERNATIONAL ELECTRO TECHNICAL COMMISSION)

is harmonic useful or it distort the alternating quantity?

2 Answers  

---

How to check the thermocouple is correctly connected to cable for K type? (i,e positive pole is connected to non magnetic conductor and negative pole is connected to magnetic conductor)

0 Answers  

---

What is the purpose of SOTF being used inspite of distance Protection given?

7 Answers   Alstom,

---

What is burden of a current transformer. What is function of core in Transformer

1 Answers   Jindal Steel and Power, NCC,

---

what is Electrical BMS

3 Answers  

---

Why we use auxillary relay ? what is function of differential relay, directional o/c relay?

0 Answers   Century Rayon, Mechanical,

---

why the rotor current becomes in steady state during high slip region? please verify with equations.

0 Answers  

---

Synchrounous motor is three phase motor,but its not self starting .why?

23 Answers   Delta Beverages, KI, L&T, NTC, TVS, Wipro,

---

How many speed of dg start motor for engine starting time

1 Answers  

---

can we use ps class in combination with protection class in differential protection and over current protection.

1 Answers  

---

Hi ,what the accurate method to set correct(In) over load to protect the 3~ motor

4 Answers  

---

I have 90KW Motor 60 Hz,380V Pf 0,88. after testing the Motor without Load is the no load Current 36 A,but wenn i put load after 2 hours the current increase more than 156 A. Can anybode tell me waht is the Problem?

4 Answers   ABB,

---