Answer / vilas

This is the specification of the battery, we have
to mention it for purchasing t,i.e. the capacity of the
battery in ampere-hour,1 AH means it can supply one ampere
to the load (which full load current is one amps)for one
hour.

Answer / guest

amper Houre battery current for one hore on full load

Answer / quanta

It is the electric charge transferred by a steady current
of one ampere for one hour. 1Ah=3,600 Coulombs. It is the
unit of the electric charge, Q.

Answer / rajendra das

AH means the ampere hour of battery or we can say that 3600c
That means the battery can withstand the amount of current per that hour.
Ex:- If the battery is 120 AH, then it can give the amount of current ie.(120 Amps) per hour after the breakdown of power.(In view of UPS).
If any thing is better answer then please!

Answer / gsuman1989

ampere hour.
If we have a battery of 12Ah, It means it supplies 12 ampere of current per hour. or in case of charge it produce 43200C per hour.

Answer / arr

amper Houre

Available in battery 1000 Ah & 500AH When our load required
used .

what is the difference between megger and earth resister ??

0 Answers   HMPL,

Z transform is use when system is not a) converges b) diverges

0 Answers   CCP,

How can I calculate ISF of current transformer?

0 Answers   Cigniti Technologies,

how to reduce earth resistance in sandy soil.

1 Answers  

What is the advantangeous over SFU (switch fuse Unit) & FsU (Fuse Switch unit) which one is better & application of Both?

2 Answers  

in case of OC+EF relay, how the burden is divided/calculated/shared by the CTs in case of normal (healthy condition) and during fault conditions.? three coils of OC & ef coil is conected in residual connection across the three CTS.

1 Answers  

what is static electricity and how it generates?

2 Answers  

how to syncronize two dg sets

3 Answers  

What are the voltage values for LT,HT,EHT and other voltages??

22 Answers   INEL, MNC,

What would be the size of wire used for 2 Ton of window A.C?

0 Answers  

A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.

0 Answers  

Can step down transformer works as step up one???

2 Answers