I want to Know how many LUNs are in my Solaris10 server as
well as NIC cards ?
Answers were Sorted based on User's Feedback
Answer / sukanta ghosh
to see the Hba on the system
cfgadm -al
fcinfo
format
NIC card
dladm
| Is This Answer Correct ? | 3 Yes | 0 No |
Answer / basunix
The following command lists all remote ports as well as the
link statistics and scsi-target information:
# fcinfo remote-port -sl -p 210100e08b272ab5
Remote Port WWN: 210100e08b296a60
Active FC4 Types: SCSI,IP
SCSI Target: no
Node WWN: 200100e08b296a60
Link Error Statistics:
Link Failure Count: 0
Loss of Sync Count: 0
Loss of Signal Count: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
truncating........
LUN: 0
Vendor: SUN
Product: T300
OS Device Name: Unknown
LUN: 1
Vendor: SUN
Product: T300
OS Device Name: /dev/rdsk/c4t50020F230000B897d1s2
LUN: 2
Vendor: SUN
Product: T300
OS Device Name: /dev/rdsk/c4t50020F230000B897d2s2
LUN: 3
Vendor: SUN
Product: T300
OS Device Name: /dev/rdsk/c4t50020F230000B897d3s2
truncated.........
| Is This Answer Correct ? | 3 Yes | 0 No |
Answer / kiranks84
using this file also we can find LUN number
#cat /etc/iscsi.conf
and finding nic card
# prtconf -v| grep net
| Is This Answer Correct ? | 1 Yes | 6 No |
what is the diff between Sol9 and Sol10 Booting procedure
How to detect a newly added device if you are not able to detect the device using devfsadm?
please give detail procedure how do replace failed disk under control of SVM and VxVm
You have a boot disk under svm, the machine fails to boot and remains in ok prompt? what could be the possible reason?
how to use Multipathing in Solaris
In solaris we have two directories for commands,what are they, Is there any difference between those.
how many servers are maintaining and what is your 'user base' in the organization?------friends please tell me in what way the answer should be?
If a user logs in to UNIX, it displays the desktop and then immediately logs you back out, what could be wrong?
How can you set EEPROM settings from Solaris?
how to share a directory with nfs server and how client mount the nfs share
when i am starting solaris10 with 'fail safe mode' on intel machine it is asking "#starting shell".what is it and how to solve this problem?
wht is the purpose of autofs and automountd commands..?