Answer / bharath

fixed series compensation is connected in series in the line ...
it virtually reduces the transmission line length

Answer / sudhir soni

Fixed series compensation is connected in series in the
line.

for the purpose:
-increased transient (angular) stability of a power
corridoor
- increased voltage stability of the grid
- improved voltage profile along the power corridoor
- optimized power sharing between parallel circuits

Answer / rajkumar

Parallely for avoiding relay tripping

Why can not you store AC power in battery like DC power?

1 Answers   NTPC,

---

how much battery need for 2kv online ups for 2hr backup

3 Answers   Eaton, Emerson,

---

What is the difference between Isolator & Load Break Switch?

7 Answers   Infotech,

---

What is the method of estamating of cable, CB,MCB ?

0 Answers  

---

When we use air circuit breaker, it has O/L protection ,time delay SC protection, Instataneous SC protection & ground fault protection. They all have some setting range. But what is the suitable/allowable setting for the above protection which will be safe for the equipment? For example-O/L protection setting have a range of (0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.8,0.9,1.0)xIn Time delay SC protection have a range of (1.25,1.5,2,3,4,6,8,10,12)xIn Time delay setting is 0.02,0.1,0.2,0.3,0.4 Instataneous setting is fixed to 20xIn Gound fault setting is given 100A,300A,600A,900A,1200A This setting are for 2500A ACB. So what will be the basic allowable setting for the above protection? is there any formulae to calculate this<

0 Answers   Lupin,

---

Why it need to form a capcitor when it not been in use from three or two year. Plz describe it technically.

0 Answers  

---

why the supply power frequency is 50hz in india? where as it is 60hz in US?

4 Answers  

---

difference between relay and solenoid?

2 Answers  

---

What tests should i carry over on a newly rewinded DC Generator with voltage rating of 38 volts and current rating of 350 amps, to certify that the machine is OK?

0 Answers  

---

what are the settings is there for ABB REM543 Generator Protection Relay

1 Answers  

---

Briefly describe three methods that are usually used by electricity suppliers to control voltage levels?

0 Answers  

---

On a 10 KVA UPS we have to provide a DC MCB for Battery bank of 16 nos (12 V 65 AH). What Shall be the current rating of DC MCB ?

6 Answers   RR, TNEB Tamil Nadu Electricity Board,

---