what is the difference beteeen Annealing and stress
releaving
Answers were Sorted based on User's Feedback
Answer / mukesh parekh
Annealing means softning of any component for Maching and
core refining. Where as Stress Releaving carried out to
remove stresses from Febrication Body, Casting Components
for Weather distortion, Heavy Maching stresses for avoiding
distortion in Hardning process. Stress Releaving Process is
mainly carried out to remove Stress from components without
reducing basic hardness of material.
Is This Answer Correct ? | 15 Yes | 0 No |
Answer / muhammad anjum
ANNEALING IS A PROCESS IN WHICH WE SOFTEN THE METAL .
STRESS RELEAVING IS THE PROCESS IN WHICH WE REMOVE THE
RESIDUAL STRESSES WHICH OCCUR DUE TO HEAVY WELDING , HEAVY
MACHINING,AND DURING FABRICATION
Is This Answer Correct ? | 3 Yes | 0 No |
Answer / arnab bakshi
Annealing is done to soften the material for Machining and
core refining. Where as Stress Releiving carried out to
remove stresses from Febrication Body, Casting Components
for Weather distortion, Heavy Maching stresses for avoiding
distortion in Hardning process without decreasing the
hardness of the material.
Annealing(full) is usually carried out at temperatures
above Ac3, whereas Stress relieving is generally a
subcritical process.
Is This Answer Correct ? | 2 Yes | 0 No |
Answer / devashish
ANNEALING: softens metal ; Stress Relieving:internal stress
are removed without affecting hardness
ANNEALING:at high temp. above Ac1 and Ac3 ; Stress
Relieving:sub critical pcs
ANNEALING:cooling rate is either slow or rapid i.e
non-uniform ; Stress Relieving:Uniform Cooling Rate
ANNEALING: diffusion may take place ; Stress Relieving:no
diffusion
Is This Answer Correct ? | 2 Yes | 0 No |
Answer / pawan
Annealing is the process in which the hardness of material
minimised and stress releaving is the process in which we
stress carried out without remove the material hardness
Is This Answer Correct ? | 1 Yes | 0 No |
Answer / siva varun
Annealing involves diffusion where as stress relieving may
or may not involve diffusion.
Is This Answer Correct ? | 1 Yes | 3 No |
How do you express pitch of gears?
How does iron and steel exhibit allotropy?
How to calculate heat affected zone in weld?
what is the grain size of lead as an element and as an alloy such as lead tin alloy?
What is the melting point of e70 steel, 304,308,316 stainless steels?
What is gold investment casting?
Are all metals heavy? Explain.
What is mean by D2 Material used for Die tooling? What are the composition in that?
difference between sand casting and shell casting
How would a salt and water solution clean a penny but a vinegar and salt solution will not clean a penny? What is the cause of this?
What is hardest cutting tool material?
When using mercury to recover very, fine gold from ore, define what is the best way to separate the gold laden mercury from the ore?