Answer / prashant karanjekar

It is term referring to the bending & rotating effect of an
eccentric force upon a member or joint is called
moment.when force is coming on the body towards against &
opposite each other is called shear.In shear connection
top & bottom flange of the connecting member is not welded
to the connected member & in moment conection top & bottom
flange of the connecting member is welded to the connected
member.
when more load is not coming on the connection that time
member can be rotate clockwise or counterclockwise so there
moment conection used.

What will be the maximum length of RCC Lintels?

3 Answers  

---

how many types of survey and what are levelling instrument?

0 Answers  

---

Detection of a beam & a girder are––––

0 Answers  

---

How you read 5x3x1 #4 @ 20" 0/C in steel structure?

0 Answers   Ansu Construction,

---

How much percentage of brick bats allowed in CD-75 bricks

0 Answers  

---

In IS:456-2000 the workability of concrete is given in mm (slump)in cl.7.1. In IS:10262-1982, cl.3.3.4 & table-6 says +/- 3 percent adjustment is required in the quantity of water (calculated as per table-4 or 5), for each increase or decrease in the value of compacting factor (i.e. workability of concrete) by 0.1. How it is possible to calculate the exact quantity of water required for a particular grade of concrete? What is the relation between Slump & Compacting factor of concrete?

1 Answers   Unitech,

---

1.Why we are preferring 43 grade cement than 53 grade cement. 2. Approximate cost difference between 43 and 53 grade cement. Thanks.

0 Answers  

---

What are the methods to do a estimate.

3 Answers   Jindal, L&T, Soba,

---

which tests for concrete pouring period at the site?

5 Answers   Al Turki, L&T,

---

if we use 1.25 bag of cement 3 pharma metal and 2 pharma crush sand what is the strenghtexpected for RCC column

0 Answers  

---

give me the rate analysis for Bituminous Macadam and SDBC

0 Answers   CCCL, IVRCL,

---

which tie is used in binding of steel double tie or single ti?

1 Answers  

---