Answer / ambrose raj

vapour absorption refrigeration system need less mech energy
input and more heat energy input.so it should be used where
heat energy is freely available,for example we can use it in
cars where heat is available freely in exhast gas

Answer / gelot gautam

where waste heat is available,there we used var system.in power plants where not waste is available bacause waste heat is already use in powerplant for reheat generation.

Answer / jamshed ali

we use water in refrigeration system becouse vapour occupie
more space then water so we are convert the vapour in
liquid form then utilise to generate power.

2. Dry saturated steam at 3.5 bar is expanded through a convergent nozzle to 2.2 bar. The exit area is 5 sq. cm. Calculate the exit velocity and mass flow rate, assuming isentropic expansion and super saturated flow. b) A cast iron cylinder head is fastened to a cylinder of 750mm bore with 12 stud bolts. The maximum pressure inside the cylinder is 3 Mpa. The stiffness of part is thrice the stiffness of the bolt. What should be the initial tightening load so that the point is leak proof at maximum pressure? Also choose a suitable bolt for the above application 2 The propeller shaft of a marine engine is to transmit 600 kW at 1200 rpm, without a significant bending. The efficiency of the propeller is 88% at 32 knots ( 1 knot = 1085 km/hr). If the slenderness ratio is less than 50 and the permissible shear stress should not exceed 65 Mpa. Determine the diameter of shaft. 3 A semi-elliptic leaf spring consists of two extra full-length leaves and six graduated length leaves, including the master leaf. Each leaf is 7.2 mm thick and 65 mm wide. The centre-to-centre distance between the two eyes is 1.3m. The leaves are pre-stressed in such a way that when the load is maximum, stress induced in all leaves are equal to 380 N/mm sq. Determine the maximum force that the spring can withstand

0 Answers  

---

why piston is cylindrical in shape

7 Answers   Clarion Technologies, Olam International,

---

time vS speed Graph for mechanical press?

0 Answers  

---

hi, if anyone have previous year paper of NHPC or some questions, Please send me at gupta.pankaj20@gmail.com

0 Answers  

---

how many types of suspensions are used in automobiles?

0 Answers  

---

Name any four commonly used refrigerants.

0 Answers  

---

what is fuel oil viscosity, specific gravity?

2 Answers  

---

how many maximum enter 2mm Dia solid cylindrical pipe into 8mm Dia hollow cylindrical pipe. give answer with calculation.

0 Answers   Bhel,

---

what should be sensor sensitivity of accelerometer in vibration? And what is the main difference between accelerometer and proximity sensors and others?

0 Answers   Reliance,

---

plz get me the placement paper for the hindalco industries Ltd. plz mail it on ashishkmishra15@yahoo.co.in

7 Answers   Hindalco,

---

What type of Voltage should be in the Resistance Welding. Should it be High or Low & Why?

1 Answers  

---

What is surging in centrifugal compressor. how its happened and how to avoid it.?

10 Answers  

---