Answer / guest

BPDU is a type of updation generated by the ROOT BRIDGE in
the switch based networks using STP.

because of this every switch knows each and every path to
the destination now here all the authority to run the
network smoothly is in the hands of root bridge.....which
actually tells which switch port will be in the forwarding
state and which will be in the blocking state....so as to
stop the loops....

which is also controlled by these BPDUs.

Given the IPX address 4a.0002.1111.a999, what is the network ID and what is the node ID? A.) net 4a host 0002.1111.a999 B.) net a999 node 0002.1111 C.) net 0002.1111.a999 node 4a D.) net 0002.1111 node a999

2 Answers  

---

Identify the OSI layer responsible for end-to-end connections? A.) Network B.) Transport C.) Session D.) Data link E.) TCP

4 Answers  

---

Identify the hardware component that stores the backup configuration? A.) RAM B.) NVRAM C.) Flash D.) ROM

1 Answers  

---

MIDI and MPEG are examples of what layer of the OSI seven layer model? A.) Session B.) Network C.) Datalink D.) Transport E.) Application F.) Presentation

4 Answers  

---

Identify the command to configure the configuration-register? A.) Router# config-register 0x2102 B.) Router(config)# config-register 0x2102 C.) Router(config-reg)# 0x2102 D.) Router> config-register 0x2102

2 Answers  

---

When editing a line in the CLI mode, what does 'CTRL-A' do? A.) Moves you to the previous command. B.) Moves you to the next word. C.) Moves you to the end of the line. D.) Moves you to the next command. E.) Moves you to the beginning of the line.

1 Answers  

---

If a frame is received at a switch and only the destination hardware address is read before the frame is forwarded, what type of switching method is this? A.) Store-and-drop B.) Latency C.) Store-and-forward D.) Cut-through

2 Answers  

---

Which statement about Ethernet networks is true? A. The advantage of a full duplex is the ability to transmit data over 111 cable B. Full duplex Ethernet requires a point-to-point connection when only two nodes are present C. Ethernet switches can use full duplex mode to connect multiple nodes to a single pod of a switch D. Half duplex is a cut through packet processing method that is vow fast little error correction Full duplex is a store and forward method that is slower but has better error correction

1 Answers  

---

You have powered on a new router and you want to create an initial configuration. Which mode should you use? A. copy mode B. user mode C. setup mode D. startup mode

4 Answers   Enrich,

---

Which of the following is a valid extended IP access-list? A.) router(config)# access-list 101 permit tcp host 172.16.30.0 any eq 21 log B.) router# access-list 101 permit tcp host 172.16.30.0 any eq 21 log C.) router(config)# access-list 101 permit any any 172.16.30.0 D.) router(config)# access-list 101 permit ip host 172.16.30.0 any eq 21 log

2 Answers  

---

Which layer defines bit synchronization? A.) Application B.) Network C.) Transport D.) Physical E.) Session F.) Session

1 Answers   Rooman,

---

Hi all, Kindly can you tell me what is demand ccna voice in field and what is profile of ccna voice.so pl very urgent bcz i am going to join institute

3 Answers  

---