clock frequency of 8051 microcontroller.
Answers were Sorted based on User's Feedback
Answer / s.madhan raj
Clock supported by a microcontroller is specified in it’s
name example ATMEL “AT89C2051-24PI “ in this 24 specifies
that microcontroller can support a maximum of 24MHz crystal
| Is This Answer Correct ? | 7 Yes | 3 No |
Answer / sameena begum
Internal clock frequency of mc is the crystal frequence and
typically 8051 designs can run from 1MHz to 16MHz.
| Is This Answer Correct ? | 5 Yes | 1 No |
Answer / sandeep m. parmar
I would like to add to my previous answer: If we are using
serial communication than a clock frequency of 11.0592MHZ
is used. while calculating the Baud rate of serial
communication, using 11.0592MHZ we will get standard baud
rates of IBM compatible Baud rate.
| Is This Answer Correct ? | 4 Yes | 0 No |
Answer / rahul choudhary
11.0592 MHz for compatible with the other devices
| Is This Answer Correct ? | 3 Yes | 0 No |
Answer / md arshad ahamed
The professional and exact text book answer is 11.0592 no doubt
| Is This Answer Correct ? | 3 Yes | 0 No |
Answer / sandeep m. parmar
The operating clock frequency of different versions of the
8051 based devices is 12MHZ to 40MHZ. Some of the 8051
based devices from ATMEL, Dallas semiconductor,etc.
operates at upto than 100MHZ.
| Is This Answer Correct ? | 1 Yes | 1 No |
explain the principle of operation of successive approximation adc.
What is pin diode?
which transform is better? haar or hadamard
What Role Does Electronics And Communications Engineer Play In Thermal Power Station?
what is differences between 3 way manifold transmitter and 5 way manifold transmitter?
10 bit A/D converters,the quantization error in % is??
How is the inverter circuit classified based on commutation circuitry?
Why we use capacitors with crystal?
Can you please share working of LED ?
what is the difference betweeen FM and FSK modulation?
We are facing the problem of communication failure between seimens drives and ABB DCS. Between drives and DCS on RLM -01 module for communication purpose. We found red blinking i.e error blinking in RLM -o1 module. So we replaced with new one but after one month same problem again came. So again we installed old RLM-01 module. Now also RED blinking is coming but sometimes drives are not tripping. What will be the cause for this problem?
among the chebsew and butterworth filter which is more efficient?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)