what is star&delta connections?
Answers were Sorted based on User's Feedback
Answer / asim raza
in star conection 3 ends of the coils are comon other 3 ends
open for supply
phase crurrent and line crurrent same
line voltages=1.742phase voltages
indelta sex ends conect each other
line v=phase v
line crurrent=1.742phase crurrent
| Is This Answer Correct ? | 17 Yes | 4 No |
Answer / ankaraju
star:All similar points are conected it is called (in three
phase) star.it must be open
Delta:vice versa,it must be closed loop
| Is This Answer Correct ? | 15 Yes | 3 No |
Answer / veresh g
star conection 3 ends of the coils are comon other 3 ends
open for supply
| Is This Answer Correct ? | 4 Yes | 2 No |
Answer / anujmipsl
in star delta starter,there are three contactors,one timer use in them, when we start the starter in starting star and main contacter is on after 5 seconds star contactor is going to off mode through the timer setting, and afterall main and delta contactor is on position, when star contactor is on motors current is increasing slowly, if this motor is not running at this position for long time, so after the timer setting it will going to delta position in delta position it will taking a normal current
| Is This Answer Correct ? | 0 Yes | 0 No |
What is the difference between bundled conductors and double circuit?
Why donot sleep below the tree for night time?
Stator of 3-phase IM has 3 slots per pole per phase, calculate number of stator pole pairs. A 1 B 6 C 2 D 3
A jet of fluid strikes a plate What was the force required to counter it?
what is motor?
How to covert the ac to dc and how to control the dc output?
how does oil cools the transformer
How to decrease or increase the range of voltmeter? can an ammeter be used to measure voltage? can a wattmeter used as voltmeter and ammeter?
Comparative difference between 33Kv & 66KV for transmitting the load of 7 MW at a distance of 34 Km.
why we use 3 phase in our country?..why no 4,5 or 2??
What are the starting currents of different motors and also what are the running currents, and idle currents?
where connected OLTC for transformers?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)