What is a good device to use for obtaining viscosity data for a non-newtonian fluid?

0 Answers  

---

how much maximum power can be generated by 320v, 10kg-cm synchronus motor if shaft is roteted mechanically at 50 to 60 rpm?

0 Answers  

---

how to convert Nm3/hr to Kg/hr for air, @ 10.4 kg/cm2.g dischare pressure, does density doesn't affect on calculation?

1 Answers  

---

Who built the first production scale pla (polylactic acid) facility?

0 Answers  

---

Question 68 – Biochemical Oxygen Demand (BOD) could be calculated using the formula BOD = (DOi - DOf) (Vb / Vs) where Vb = Volume of bottle in ml, Vs = Volume of sample in ml, DOi = Initial dissolved oxygen in mg / L, DOf = Final dissolved oxygen in mg / L. (a) By using a bottle of Vb = 300 ml with sample Vs = 30 ml, find the BOD if DOi = 8.8 mg / L and DOf = 5.9 mg / L. (b) By using a bottle Vb = 600 mL with sample Vs = 100 mL, find the BOD if DOi = 8.8 mg / L and DOf = 4.2 mg / L. (c) Find the average BOD = [ Answer of (a) Answer of (b) ] / 2. (d) If the BOD-5 test for (a) - (c) is run on a secondary effluent using a nitrification inhibitor, find the nitrogenous BOD (NBOD) = TBOD - CBOD. Let TBOD = 45 mg / L and CBOD = Answer of (c).

1 Answers  

---

Three solid objects of the same material and of equal mass – a sphere, a cylinder (length = diameter) and a cube – are at 5000C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change of temperature is smallest for a) cube b) cylinder c) sphere d) equal for all the three whyyyyyyy???????

3 Answers   GATE,

---

Question 59 – There are 5 simultaneous equations with 5 unknowns as follow : 16 V – 4 X – Z = 36, 4 X – 4 W – Y + Z = 3, 8 V + 4 W – X + Y = 10, X – W = 1, V + W = 0. Find the values of V, W, X, Y and Z accurately within 15 minutes. State the computer program that you use to get the answers.

1 Answers  

---

what is the PH value for boiler water.

12 Answers  

---

Explain the functioning of a three-way catalytic converter.

0 Answers  

---

whats the allowed tolerance of pipe to pipe butt joint mismatching

0 Answers  

---

Question 107 - In N + 1 Rule in Quantum Chemistry, whenever a spin 1 / 2 nucleus is adjacent to N other nuclei, it is split into N + 1 distinct peaks. In 1 peak or singlet, there is only 1 magnitude. In 2 peaks or doublet, the ratio of magnitude of each peak is 1 : 1. In 3 peaks or triplet, the ratio of magnitude of each peak is 1 : 2 : 1. In 4 peaks or quartet, the ratio of magnitude of each peak is 1 : 3 : 3 : 1. In 5 peaks or quintet, the ratio of magnitude of each peak is 1 : 4 : 6 : 4 : 1. (a) By using binomial coefficients or Triangle of Pascal find the ratio of magnitude of each peak if 6 peaks exists. (b) How many adjacent nuclei are available in a spin 1 / 2 nucleus in such situation of 6 peaks?

1 Answers  

---

For amonia manufacturing process if pressure, temperature would be increase over optimum level what would be happen?And what steps should be taken?

0 Answers  

---