What is a solvent?

0 Answers  

---

Which part of oil creates smoke? ( aliphatic, aromatic, paraffin)

1 Answers  

---

Question 64 – According to a heuristic of chemical engineering plant design, assume a pressure difference dP = 4 psi for each 10-ft rise in elevation. A pump is needed to pump liquid from a storage tank at a lower elevation to a heating tank at a higher elevation with the elevation difference of 60 ft. (a) Find the pressure loss due to such elevation. (b) If the required minimum inlet pressure to the heating tank is 9 psi, with 1 control valve is installed between pump and heating tank, what is the dP minimum required for the control valve and the entrance to the heating tank when the heuristic mentions that at least 10 psi is required for the control valve? (c) The pressure at the inlet of the pump is 8 psi and the flowrate of the liquid produces pressure head of 50 psi. What is the total pressure produced by the pump? (d) Assume a pipeline dP of 2 psi / 100 ft for liquid flow in a pipe according to heuristic, what is the approximate maximum length of the pipe in ft that can be installed between the pump and the heating tank?

1 Answers  

---

Explain what is the significance of the minimum flow required by a pump?

0 Answers  

---

can anyone send me the written test paper of Indian oil corporation ltd. My email id is pratuljakhmola@yahoo.com

0 Answers  

---

PROCESS DESIGN - EXAMPLE 21.3 : According to a heuristic of chemical engineering plant design, assume a pressure difference dP = 4 psi for each 10-ft rise in elevation. A pump is needed to pump liquid from a storage tank at a lower elevation to a heating tank at a higher elevation with the elevation difference of 60 ft. (a) Find the pressure loss due to such elevation. (b) If the required minimum inlet pressure to the heating tank is 9 psi, with 1 control valve is installed between pump and heating tank, what is the dP minimum required for the control valve and the entrance to the heating tank when the heuristic mentions that at least 10 psi is required for the control valve? (c) The pressure at the inlet of the pump is 8 psi and the flowrate of the liquid produces pressure head of 50 psi. What is the total pressure produced by the pump? (d) Assume a pipeline dP of 2 psi / 100 ft for liquid flow in a pipe according to heuristic, what is the approximate maximum length of the pipe in ft that can be installed between the pump and the heating tank?

1 Answers  

---

In which state sulphur exists at 40 degrees temperature and 40 atmospheric pressure in natural gas having sulphur composition 0.1 ppm?

0 Answers   Nagarjuna Fertilizers, NFCL,

---

Define pcbs?

0 Answers  

---

i need last year question paper of GATE exam of chemical stream.but i failed i geting exam papers.soits humble request to u that if any body found last years GATE exam paper of chemical stream then send it to on this mail address.i shall be thankful to u for this. mail address:- sachin_4255@yahoo.co.in thank you.

0 Answers  

---

how interstage pressure of multistage compressor is calculated?

2 Answers  

---

pls send me HPCL & reliance test paper for chemical engineering.....

4 Answers   BCPL, HPCL, NOCL, Reliance,

---

What is load?

0 Answers  

---