Question 89 - A hemocytometer is a device that is used for counting cells. In an engineering experiment, 100 microlitres of cell suspension is diluted with 50 microlitres of Trypan blue dye. Only death cells appear blue in color when stained with the dye. There are 57 cells detected in a hemocytometer, where 5.3 % of them appear blue when the chamber of the meter is placed under a microscope. Each square of a chamber can contain 0.0001 mL of liquid. (a) Calculate the number of viable cells. (b) The cells ocupied 5 squares. Calculate the average number of viable cells / square. (c) Calculate the dilution factor of the cell suspension by using the formula : Dilution = final volume / initial volume. (d) Calculate the concentration of viable cells / mL by using the formula : Concentration = (Average number of viable cells / square) x dilution x (square / volume).

1 Answers  

---

why 14.7 pound/inch2 is used in idustries as unit of pressure bcz here not sea level and not a temperature is 0C (zero degree celcius)?????????

0 Answers  

---

Why methanol like petroleum compounds are stored in underground storage tanks?

2 Answers   MPCL, NFIL, Reliance, UPL,

---

Question 86 - (a) Male with genotype GGmm and phenotype gray wingless mates with female with genotype ggMM and phenotype black winged in fruit flies. G is dominant to g in color. M is dominant to m in wing shape. If the actual distribution of the second generation of the fruit flies was as follow : 890 gray wingless, 900 black winged, 115 gray winged, 95 black wingless, calculate the recombination frequency betwen the two genes and distance in recombination units. Let 1 map unit = 1 % recombination. (b) A DNA molecule has 180 base pairs and 20 % adenine. How many cytosine nucleotides are present in this molecule of DNA?

1 Answers  

---

QUANTUM COMPUTING - EXAMPLE 32.6 : (a) Let H | 0 > = 0.707 ( | 0 > + | 1 > ), H | 1 > = 0.707 ( | 0 > - | 1 > ). Find the values for H | 0 > + H | 1 > and H | 0 > - H | 1 >. (b) In quantum computing, a qubyte is a quantum byte, or 8 quantum bits, a sequence processed as a unit. A qubit is a quantum bit. According to Alexander Holevo in his theorem, n qubits cannot carry more than n classical bits of information. What is the maximum amount of classical bits of information that can be carried by 1 qubyte.

1 Answers  

---

Question 39 - Acetone and ethanol are separated using a distillation column with a partial condenser and partial reboiler. An equimolar, sub-cooled liquid feed enters at 100 kmol / hr and condenses 1 mole of vapor for every 6 moles of feed. The separation requires a distillate vapor that is 95 mol % acetone and bottoms liquid that is 5 mol % acetone. The reflux is returned from the condenser to the column as a saturated liquid and the operation is run at (L / V) = 1.4 * (L / V) min. Assume constant overflow conditions. (a) Feed operating line is y = [ q / (q - 1) ] x - z / (q - 1) where z = 0.5 for equimolar liquid mixture of 2 components, q = (L’ - L) / F where L’ = L + F + (F / 6) for condensation of 1 mole of vapor / 6 moles of feed. What is y = f(x)? (b) The rectifying operating line is y = (L / V) x + (D / V) (xd) where (L / V) min goes through the points A (0.95, 0.95) and B (0.53, 0.69), V = L + D. What is y = f(x)? Let xd = 0.95. (L / V) min is the slope of the 2 points A and B.

1 Answers  

---

The power required for size reduction in crushing is???

5 Answers  

---

Question 92 - (a) In order to determine the slurry volume (L) in chromatography, arrange the formula using the following parameters : slurry concentration (%), slurry volume (L), settled chromatography medium volume (L), 100. (b) In order to determine the chromatography medium volume (L) in gel filtration chromatography, arrange the formula using the following parameters : sample volume to be processed (L), chromatography medium volume (L), sample volume in percent of total column volume (%), 100.

1 Answers  

---

ENGINEERING NUMERICAL METHODS - EXAMPLE 19.3 : There are 2 simultaneous equations : (A1) x + (B1) y = D1 and (A2) x + (B2) y = D2. (a) By using Excel program, find the values of x and y when A1 = 80, A2 = 150, B1 = 52, B2 = 100, D1 = 3.5 and D2 = 2.3. (b) Write the expression of Excel in the form of =MMULT(MINVERSE(W:X),Y:Z) in order to get the values of x and y. W, X, Y and Z may be A1, A2, B1, B2, D1 and D2.

1 Answers  

---

What is the method of determining maximum differential pressure during hydro testing of shell and tube heat exchangers?

0 Answers  

---

what is ifference between PFR ,MFR and batch reactor?

9 Answers   BARC, IOCL,

---

Question 76 - Let C% be the fractional crystallinity, Rs = density of sample, Ra = density of amorphous form and Rc = density of crystalline form. In a polymer, these unknowns could be related by the equation C% = (Rc / Rs) (Rs - Ra) / (Rc - Ra). (a) Find the equation of Rc as a function of C%, Rs and Ra. (b) Two samples of a polymer, C and D exist. For sample C, C% = 0.513 when Rs = 2.215 unit. For sample D, C% = 0.742 when Rs = 2.144 unit. Both samples C and D have the same values of Ra and Rc. Find the values of Ra and Rc in 6 decimal places.

1 Answers  

---