Answer / kang chuen tat (malaysia - pen

Answer 31 : T = 60 + 273 = 333 K. H = 129440 (35) + (-169.5 / 2) (333^2 - 298^2) + (0.64781 / 3) (333^3 - 298^3) = 4917920 J / kmol. The answer is given by Kang Chuen Tat; PO Box 6263, Dandenong, Victoria VIC 3175, Australia; SMS +61405421706; chuentat@hotmail.com; http://kangchuentat.wordpress.com.

What kind of concerns is associated with temperature pinch points in condensers?

0 Answers  

---

The water is superheated steam at 440 degree Celsius and 17.32 megapascals. Estimate the enthalpy of the steam above. From the steam table for water at 440 degree Celsius, enthalpy of steam, h at 18 megapascals is 3103.7 kilojoules per kilogram and at 16 megapascal is 3062.8 kilojoules per kilogram. Assume that h = mP c where P is pressure; m and c are constants at fixed temperature with small differences in P.

1 Answers  

---

Part time jobs for engineer students working or studying

2 Answers  

---

In a selection of suitable heating equipment for drying of crystals of biochemical, the one of the lowest current consumption will be chosen for safety consideration. Selection is available : (A) 120 V microwave oven 1800 W. (B) 240 V conventional oven 11000 W. Which one should be chosen and why?

1 Answers  

---

Explain what is a good way to get started in doing a plant-wide steam consumption analysis?

0 Answers  

---

What particle sizes are electrostatic precipitators used to remove?

0 Answers  

---

ENGINEERING NUMERICAL METHODS - EXAMPLE 19.2 : For a mixture of benzene (B), toluene (T) and xylene (X), the equation applies where x for B, T and X will sum up to 1. The equation of x for each component is x = (L / V + 1) (F) / (L / V + K). The data of F for each component are : 0.5 for B, 0.35 for T, 0.15 for X. The data of K for each component are : 1.98 for B, 0.76 for T, 0.24 for X. When x for B + x for T + x for X = 1, find the values of (a) L / V; (b) x for each component of B, T, X respectively. You may use Excel program - Data : What-If-Analysis for Goal Seek to perform the iterative calculations.

1 Answers  

---

When should one be concerned with the tube wall temperature on the cooling waterside of a shell and tube exchanger?

0 Answers  

---

what is ifference between PFR ,MFR and batch reactor?

9 Answers   BARC, IOCL,

---

DIFFERENTIAL EQUATIONS - EXAMPLE 20.3 : A differential equation is given as y” + 5y’ + 6y = 0, y(0) = 2 and y’(0) = 3. By using Laplace transform, an engineer has correctly produced the equation L {y} = (2s + 13) / [(s + 2)(s + 3)] = A / (s + 2) + B (s + 3). (a) Find the values of A and B. (b) The inversed Laplace transform of 1 / (s + a) is given by exp (-at) where a is a constant. If the statement : L {y} = 9 L { exp (-2t) } - 7 L { exp (-3t) } is correct, find the equation of y as a function of t as a solution to the differential equation stated in the beginning of this question. When L {d} = 9 L {b} - 7 L {c}, then d = 9b - 7c with b, c and d are unknowns.

1 Answers  

---

What step should be taken in process industries if the process variable is oscillating?

0 Answers   HPCL,

---

CHEMICAL MATERIAL BALANCE – EXAMPLE 2.2 : Three hundred gallons of a mixture containing 75.0 wt % ethanol and 25 wt % water (mixture specific gravity = 0.877) and a quantity of a 40.0 wt % ethanol - 60 wt % water mixture (specific gravity = 0.952) are blended to produce a mixture containing 60.0 wt % ethanol. The specific gravity of a substance is the ratio of density of a substance compared to the density of water. The symbol of weight percent is wt %. (a) Estimate the specific gravity of the 60 % mixture by assuming that y = mx c where y is wt % ethanol, x is mixture specific gravity. Values for m and c are constants. (b) Determine the required volume of the 40 % mixture.

1 Answers  

---