RESISTONS R1 AND R2 in parallel = Total R.? 1-R=R1+R2 2-R=1/R1 + 1/R2 3-1/R +

RESISTONS R1 AND R2 in parallel = Total R.?
1-R=R1+R2
2-R=1/R1 + 1/R2
3-1/R + R1+R2
R=R1R2/R1+R2

select one

Question Posted / karangoswami

2 Answers
4415 Views
BSNL, PGVCL Paschim Gujarat Vij Company Limited, TCS, Wartsila, I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

RESISTONS R1 AND R2 in parallel = Total R.? 1-R=R1+R2 2-R=1/R1 + 1/R2 3-1/R + R1+R2 R=R1R2/R1+R2..

Answer / muhammad javed

2 option is correct.

Is This Answer Correct ?

8 Yes

4 No

RESISTONS R1 AND R2 in parallel = Total R.? 1-R=R1+R2 2-R=1/R1 + 1/R2 3-1/R + R1+R2 R=R1R2/R1+R2..

Answer / umesh

R=R1*R2/(R1+R2)

Is This Answer Correct ?

3 Yes

1 No

Post New Answer

More Electrical Engineering Interview Questions

what is unbalanced rotating magnetic field?

1 Answers

Can you explain about pole discrepancy scheme

0 Answers NCC,

why power factor is only cosine angle not sine angle?

2 Answers

why does a dc machine has high efficiency while working as a generator than as a motor

1 Answers

Define unilateral circuit?

0 Answers

Is a contactor (or master relay) required between incoming lines and a VFD? The question goes to safety. If a contactor were used before the VFD and an e-stop engaged then the motor will coast to a stop (i.e. VFD loses power) instead of stopping much faster if the VFD braking fucntion were used. It would make more sense to keep power on the VFD.

0 Answers Pride Hotels,

How to determine the breaking capacity such as break down current and break down voltage for VCB and CT's.

0 Answers

In transformer which temp should be less oil temp are winding temp?

7 Answers TCS,

how tubelight circuit is connected and how it works?

7 Answers Punj Lloyd Ltd,

why the pressure coil is not present in the three phase wattmeter?

1 Answers

What will be the change in its efficiency and other parameters of a ONAN transformer if it changed to ONAF transformer ?

3 Answers Tesla,

How the cable size for a motor is decided

14 Answers NTPC,

For more Electrical Engineering Interview Questions Click Here