1)What's are the diff. types of column based on loading?
2)Is there any difference bitween Development length &
Anchorage Length?
3) What is the basic diff. between one way & two way slab?
4) Where should use OPC & where should PPC?
Answers were Sorted based on User's Feedback
Answer / azri
3)if length width ratio less than two it s called as two
way salb and if length width ratio higher than two it s
called as one way slab.
| Is This Answer Correct ? | 23 Yes | 1 No |
Answer / ptcool
1.
Based om types of reinforcement
1) Tied Columns
2) Spiral Columns
Based on type of loading
1) Columns with axial loading
2) with uni axial eccentric loading
3) with bi axial eccentric loading
Based on Slenderness Ratio
1) Short Columns (lx/D and ly/b <12)
2) long(Slender) Columns
2.
Development length is the length overlap of bars tied to
extend the reinforcement length. is about 50 times the dia
of bar is consider to safe.
Anchorage length- this is the additional length of bar
req to insert in another at the junction. For example-
Main bar of the beam in column at beam column junction.
this length is simiilar to the lap length.
3.
when the ratio of longer span to shorter span is less than 2
is called two way slab and the when it is greater than 2 is
called one way slab.
4. opc (ordinary portland cement) settle quicker than
ppc(portland pozzalano cement). the curing period for ppc is
greater than opc.
| Is This Answer Correct ? | 20 Yes | 0 No |
Answer / vigneshwaran
1. ly/lx
(value) > 2 Is
one way slab, <
2 then its two
way slab. 2.
Column depends
uniaxial,
triaxial column
due to acting
the load i.e
eccentricity 3.
OPC - ordinary
portland cement
used all
concrete and
cement related,
PPC- portland
posalana
cement- used
for except
concrete works
| Is This Answer Correct ? | 3 Yes | 3 No |
which grade of steel is better for construction of building under earthquake zones ? why?
Ultimate strength to cement is provided by which chemical?
m-25
A bill was raised by contractor which read as follows 1.) Excavation in normal soil upto 1.5m - 250 cum 2.) Excavation in normal soil 1.5m to 3m - 240 cum 3.) Excavation in soft rock - 350 cum 4.) Excavation in hard rock - 250 cum 5.) Filling with available soil - 825 cum 6.) Filling with bought out soil - 1100 cum How can I verify the above quantities, especially for item no. 5 & 6? What checks are necessary before releasing the bill ?
What is differences between torsion and buckling?
A Cat excavator loader of 3Lm*3 heaped capacity bucket is to be used to load blasted rock directly into a crusher of capacity (consumption) of 100L
How many Sft of Level Plaster per Kg
hide face come to omegle.com ful fill ur desires
what is mixed design, define it? what is way beecher?
how to determine pile length and diameter of pile is there any thumb rule?
HOW YOU CAN DETERMINE THE WEIGHT PER METER OF STEEL RODS EASILY?
What is the average density of soil?
Civil Engineering (5086)
Mechanical Engineering (4456)
Electrical Engineering (16639)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)