Answer / k.prakashchandra

Just because it is a simple relay which employes heavy duty
contacts

What is safety of Ht panel

0 Answers  

---

Three set (each phase contain 2 cable of 400 mmsq CU XLPE AWA) of single core cables are connected to 11 KV motor of 14 MW & the switch gear supplay is taken from 11kv feeder & this supplay taken from 275 KV substation. Problem is one pair cable(L3- 2 cable ) getting very hot & gland melted and damaged in switch gear side. the other two cable haven't any more hot(ambient temp only & L3 haveing 95- 100 Degree C. The same problem happened in 275 KV substation switch gear side also where the supply taken for 11 kv switch gear. But here L2 phese cable had problem. Why it is happening like this?. The cable having temperature different at different location from gland side inthe case of 11KV feeder of 275 kv substation. why ?

2 Answers  

---

what is the meaning of insulation level?

2 Answers  

---

what is the difference between earthing and grounding of electric circuits

5 Answers   HCL, Turbo,

---

Wtat is vaccum currcuit breaker.define with cause of used.and where be use it Devise .

1 Answers  

---

what is skin effect?

6 Answers   MPSEB,

---

what is mean by PID & Principal of working

6 Answers  

---

What is the different between digital phase converter and ordinary phase converter?

0 Answers  

---

what is efficient load of transformer in percentage

4 Answers  

---

1.what is mean by 8/20 micro sec waveshape

0 Answers   Vedant,

---

the inertia constants of two machines are respectively 30and 42 MJ per MVA.when the change in frequency due to change in load in first machine is 12 Hz,the change in second machine frequency will be?

1 Answers  

---

how to ctrl motor by use of ac or dc drive.plz explain evdintly

0 Answers  

---