why is steam-water separation equipment so important in good boiler operation?

Categories >> Engineering >> Mechanical Engineering
Suggest New Category

why is steam-water separation equipment so important in good
boiler operation?

Question Posted / chjaved3013

5 Answers
9415 Views
I also Faced
E-Mail Answers

Answers were Sorted based on User's Feedback

why is steam-water separation equipment so important in good boiler operation?..

Answer / ambarish

To get Final Steam Temperature as per Design. If water is
present in the steam, super heating of steam will suffer.

Is This Answer Correct ?

7 Yes

0 No

why is steam-water separation equipment so important in good boiler operation?..

Answer / rakesh

For steam water seperation the system name condensate
recovery system used which will separate steam from water
and this water is fed to feed water tank which is further
used in boiler. These are doing because the feedwater is
treated with some chemicals which is very expensive and
furnace oil consumption will be large. thats y condensate
recovery system is a key one in steam water seperation

Is This Answer Correct ?

4 Yes

0 No

why is steam-water separation equipment so important in good boiler operation?..

Answer / rama mohana reddy

the boiler out put steam will must be superheated, because
any water content in steam it will corrosion to the turbine
blades

Is This Answer Correct ?

3 Yes

0 No

why is steam-water separation equipment so important in good boiler operation?..

Answer / k.senthilarasu

the boiler output is connected to the steam turbine.
the steam turbine always want superheated steam only so
steam water separation is required

Is This Answer Correct ?

3 Yes

1 No

why is steam-water separation equipment so important in good boiler operation?..

Answer / a0647

Because of water have some impurities to increase the
boiler efficiency water steam sepration must necessary

Is This Answer Correct ?

2 Yes

2 No

Post New Answer

More Mechanical Engineering Interview Questions

The amount of radiation emitted per scm per sec is called …. ?

0 Answers

what is gyroscopic & gyroscopic effect

4 Answers

what is your ideal job?

0 Answers Reliance,

Why is Air Conditioner capacity measured in ton like 1.5ton?

3 Answers

What are the different types of pumps? and their usage.

0 Answers John Deere,

What is a cotter joint?

0 Answers

What are the causes of troubles in boiler during operations?

0 Answers ABC Inc, RRB, Siemens,

rrb junior engg mecf questine papers

0 Answers

if dirty fluid is flowing through pipe,how it affects frictional loss?

4 Answers

Is enthalpy represent the heat content of a substance? and is the substance is liquid or gas or solid? or all

1 Answers

boiler fusible plug melt down, normally melt down due less water or feed pump failure, but is there any possibility of fusible plug melt down due to high temperature in firing zone and at that time water level is perfect at it's level.

1 Answers

how can you calculate angle of bite practically???

1 Answers JKN Limited, SVNIT,

For more Mechanical Engineering Interview Questions Click Here