Answer / guest

raja vijish nagai

Answer / abhishek

Homi jehnagir bhabha

Answer / guest

bhabha

Answer / rekha

HOMI JEHANGIR BHABHA

Answer / sindhu kirthika

ghv tr

how much height hight work permit requred

2 Answers   Atul, BARC,

---

Specific Heat of Bagasse at 50% moisture, 40% moisture and 25% moisture?

0 Answers  

---

Question 29 – For a Vernier scale that consists of 0.11 cm per section, estimate the length on actual standard ruler of 0.1 cm per section for 2.39 m and 0.91 m.

1 Answers  

---

ELECTRICAL TECHNOLOGY - EXAMPLE 16.2 : In a selection of suitable heating equipment for drying of crystals of biochemical, the one of the lowest current consumption will be chosen for safety consideration. Selection is available : (A) 120 V microwave oven 1800 W. (B) 240 V conventional oven 11000 W. Which one should be chosen and why?

1 Answers  

---

Why does catalytic converter used in an automobile?

0 Answers  

---

---

ENVIRONMENTAL ENGINEERING - QUESTION 22.2 : Biochemical Oxygen Demand (BOD) could be calculated using the formula BOD = (DOi - DOf) (Vb / Vs) where Vb = Volume of bottle in ml, Vs = Volume of sample in ml, DOi = Initial dissolved oxygen in mg / L, DOf = Final dissolved oxygen in mg / L. (a) By using a bottle of Vb = 300 ml with sample Vs = 30 ml, find the BOD if DOi = 8.8 mg / L and DOf = 5.9 mg / L. (b) By using a bottle Vb = 600 mL with sample Vs = 100 mL, find the BOD if DOi = 8.8 mg / L and DOf = 4.2 mg / L. (c) Find the average BOD = [ Answer of (a) + Answer of (b) ] / 2. (d) If the BOD-5 test for (a) - (c) is run on a secondary effluent using a nitrification inhibitor, find the nitrogenous BOD (NBOD) = TBOD - CBOD. Let TBOD = 45 mg / L and CBOD = Answer of (c).

1 Answers  

---

what is the purpose of capacitor? and capacitor load means what? how does it connect?

0 Answers  

---

What is vapour flooding and liquid floodin in distillation?

0 Answers   Deepak Fertilisers,

---

when selecting psv(pressure safety valve),what are all things we have to keep it in mind?

4 Answers   Qasco,

---

QUANTUM CHEMISTRY AND CHEMICAL ENGINEERING - EXAMPLE 31.3 : In photoelectrical effect analysis of quantum chemistry, let E = kinetic energy of electron, p = intensity of UV light, f = frequency of UV light. According to Classical Theory, E = c for all values of f, E = mp. According to Quantum Theory, E = c for all values of p, E = mf + c. In a graph, m and c are constants where m is slope and c is y intercept. If m = 2 and c = 3 with similar value of E : (a) find the value of p according to Classical Theory; (b) find the value of f according to Quantum Theory.

1 Answers  

---

REACTION ENGINEERING - EXAMPLE 13.2 : A batch reactor is designed for the system of the irreversible, elementary liquid-phase hydration of butylene oxide that produces butylene glycol. At the reaction temperature T = 323 K, the reaction rate constant is k = 0.00083 L / (mol - min). The initial concentration of butylene oxide is 0.25 mol / L = Ca. The reaction is conducted using water as the solvent, so that water is in large excess. (a) Let the molecular weight of water is 18 g / mol and the mass of 1 kg in 1 L of water, calculate the molar density of water, Cb in the unit of mol / L. (b) Determine the final conversion, X of butylene oxide in the batch reactor after t = 45 min of reaction time. Use the formula X = 1 - 1 / exp [ kt (Cb) ] derived from material balance. (c) Find the equation of t as a function of X.

1 Answers  

---

what is the role of a chemical engineer on a cement plant?

4 Answers  

---