Why strting torqe high in inducation motor?
No Answer is Posted For this Question
Be the First to Post Answer
a bulb of 100W and anather bulb of 200W , rated supply voltage 230v.when supply voltage is reduced to 100v,which bulb will give more light? and why with calculation?
Whats the principle of lightning? How protection against lightning is achieved? Types of protection? How to select the height of lightning spike? as per the area.
for distribution line ratio of x/r 1.<0.1 2.>10 3.>1 4.<0.01
How many 2 ton window A/c can runs on a 125 KVA generator?
how to calculate sizing of NGTR (Transformer rating,Loading resistor value and Current rating of resistor) and what is the X/R ratio. Details : 11kV,Capacitance 1.73532 micro farads,40kA for 1sec.
explain remenance . differentiate high remenance type ct & low remenance type ct
what is the diff between VCB & ABCB breaker in substaions? explain the operating priciples of VCB & ABCB
what is the purpose of slope in the differential relay?why we are using two slope?but in busbar differential we are using only one slope.why?
We have got the HT connection of 1000 KVA in which we have installed a seprate APFC panel at the PCC end & seprate KWH meter is installed. My question is that does the KWH reading shown in the meter is a part of the Consumption ???? ( approx 500 units is shown)
why we use MV panels??? what's r all the needs
What is a captive power plant?
pls send link about servo motor
Civil Engineering (5086)
Mechanical Engineering (4453)
Electrical Engineering (16638)
Electronics Communications (3918)
Chemical Engineering (1095)
Aeronautical Engineering (239)
Bio Engineering (96)
Metallurgy (361)
Industrial Engineering (259)
Instrumentation (3014)
Automobile Engineering (332)
Mechatronics Engineering (97)
Marine Engineering (124)
Power Plant Engineering (172)
Textile Engineering (575)
Production Engineering (25)
Satellite Systems Engineering (106)
Engineering AllOther (1379)