if a 3phase 100kva distribution transformer , 400 v,50 hz, 4-wire system is

if a 3phase 100kva distribution transformer , 400 v,50
hz, 4-wire system is loaded at 160 k.w mostly 1-phase
Lighting & Airconditioning split a.c load what will be the
net effect on the power system in terms of voltage,
powerfactor, current , efficiency of xformer

Question Posted / shahlal khan

1 Answers
3579 Views
I also Faced
E-Mail Answers

if a 3phase 100kva distribution transformer , 400 v,50 hz, 4-wire system is loaded at 160 k.w m..

Answer / pillay

how is it possible to load a 100kva xformer to 160kw? this
is abuse & blatant disregard of all safety for equipment and
life.Anyway if it is loaded as such than all your question
would be answered by the power formula if you know the constants

Is This Answer Correct ?

4 Yes

1 No

Post New Answer

More Electrical Engineering Interview Questions

how is positive, negative, zero sequence is happen.. how is effect on 3 phase system

0 Answers

What is the technical name of Transformer Oil ?

17 Answers Bhel, Don Bosco, Lanco,

WHAT IS THE DIFFERENE IN ACTION OF MCB,MCCB,RCCB

0 Answers IBM,

Electrical breakdown strength of an insulating material depends on............?why because?

2 Answers

It is advisable 2 use auto-transformer if transformation ratio is-a)110KV/11KV,b)230kv/110kv,c)110kv/66kv,d) 400kv/230kv

2 Answers

What are thermo couple cables and where they are used.

2 Answers

What does the temperature (30 deg or 35 deg celcius) mark on conservator of transformer indicates?

2 Answers MahaGenco,

WHY NUTRAL GROUND SYSTEM USED IN 33KV SYSTEM

0 Answers RasGas,

State thevenintheorem?

0 Answers

how to select energy meter? have any calculation?

0 Answers

how can we minimize the off load losses of a distribution transformer which is required to be energized 24x7 ?? capacity of the T/F is 1250 KVA and off load losses are around 2.0 KW.. can we use capacitor bank at the secondary of such a T/F to overcome off load losses? please elaborate briefly...thanks

2 Answers

what happen ehen synchronisation is done at below rated speed

0 Answers

For more Electrical Engineering Interview Questions Click Here