Answer / anand

when the synchronous motor operates beyond synchronous speed
delta(angle bt v&e) decreases.then magnetic torque decreases.and the hunting starts.

Answer / lokeshraj

A synchronous motor always tries to achieve the
shynchronous speed. IF the motor is running with the higher
the syn. speed the direction of torque will be reversed and
motor will start working as a generator and will start
getting with the external source. and will come in syn.
speed. if there is a sudden change in speed of motor then
there will b hunting. in which the motor speed oscillates
about the syn. speed. thanx.

Answer / harish

synchronous motor beyond synchronous speed will work as a
synchronous condenser which will give leading power

What will happend if given Vfd out put to step up transformer

0 Answers  

---

what are the colour's and their indications in bucholz relay?

4 Answers  

---

1. alternator has full load regulation of 4% when pf of the load is 0.8 lag, 1500 rpm. full load regulation of 1400 rpm for 0.8lag will be ________ ?? 2. torque angle of a sync m/c operating from a constt voltage bus is usually defined as space angle between _______ . 3. method most effective in finding out no load losses in large DC shunt motoris ______ . 4. current carrying capacity of fuse material depends on ______ . 5. coil has res. 10 ohm, inductance 1H. what wil be current after 0.1sec after switching on to a 500V DC SUPPL ? ? 6. effect of phase lag compensation on servo systems ___________ . 7. rotor of a dc machine is usually supported upon ______ . 8. DC motor is preferred to AC motor in which application ?? 9. 3 nos of 10:1 Xmer are connected in Star-Delta to supply a load at 230V.the supply voltage must be ______ . 10. voltage source produces max current in which circuit. 11. cal. power, if current and voltage are out of phase by 90 degree. 12. suitable length of Xmission line of power at 66 KV. 13. Which of the theorm helps in simple computation when the load across a ckt is varying ?? 14. what is the adopted line length for power Xmission of power by cables ??

5 Answers   TATA,

---

what is the difference between STAR and DELTA connection and application wise how it can be utilizedd

0 Answers  

---

why we use DO Fuse in H.T. Line ? What is the purpose of DO Fuse

4 Answers  

---

---

two 100W/230V bulb are connected in series. what would be the voltage drop across 1 bulb

6 Answers  

---

how can we minimize the off load losses of a distribution transformer which is required to be energized 24x7 ?? capacity of the T/F is 1250 KVA and off load losses are around 2.0 KW.. can we use capacitor bank at the secondary of such a T/F to overcome off load losses? please elaborate briefly...thanks

2 Answers  

---

what are feeder pillars & panels?

1 Answers  

---

what is the write prosidure of stringing of 8meter pcc pole.

0 Answers  

---

What is the criteria that generally follow by distribution licenses to fix contact demand of their industrial customers?

0 Answers  

---

At which time Synchronous generator act as a Synchronous Condenser?

4 Answers  

---

What is frequency?

4 Answers   BTCL, TCS,

---