Answer / guest

Answer: A

Identify 3 characteristics of IP RIP? A.) Distance vector B.) Administrative distance is 120 C.) Periodic updates every 60 seconds D.) Uses a composite metric E.) Can load balance

1 Answers  

---

Which command would configure Interface E0 with an IP address of 12.23.4.5 using a Subnet mask of 255.255.255.0 ? A.) ip address 12.23.4.5 255.255.255.0 B.) ip address 12.23.4.5 /24 C.) ip address 12.23.4.5 mask 255.255.255.0 D.) ip address 12.23.4.5 mask ff:ff:ff:0 E.) that is an invalid mask for a class 'A' address

3 Answers   Wipro,

---

Identify 3 UDP characteristics? A.) Reliable communication protocol B.) Applications that use UDP must incorporate reliability C.) Connnection-less oriented D.) Incorporates no handshaking

2 Answers  

---

With one method for transmitting frames through a switch, the switch receives the complete frame and checks the frame CRC before forwarding the frame. What is the switch transmission method called? A. CSMA/CD B. Full Duplex C. Cut-Through D. Half-Duplex E. Fragmentation F. Store and Forward

2 Answers  

---

Identify the command to configure the IP address 172.16.100.5 255.255.255.0? A.) Router(config-if)# ip address 172.16.100.5 255.255.255.0 B.) Router(config)# ip address 172.16.100.5 C.) Router# ip address 172.16.100.5 255.255.255.0 D.) Router(config)# ip address 172.16.100.5 255.255.255.0

2 Answers  

---

On which bas ospf take decision?

0 Answers  

---

What is HDLC?

0 Answers  

---

What is the beaconing?

0 Answers  

---

In eigrp metric parameters which 2 options are enable by default?

0 Answers  

---

8. When is Frame Tagging used? A. When you install repeaters in your network B. When you install bridges in your network C. When you install routers in your network D. When you use Switches configured with multiple VLANS

5 Answers  

---

Given the global configuration command 'banner motd #7 Hello #', what do the '#' symbols represent? A.) Escape sequence to exit the menu. B.) Nothing, just part of the banner. C.) Tic Tac Toe Macro. D.) Delimiting Character E.) Message border character. F.) Number of times message to be displayed.

1 Answers  

---

You have powered on a new router and you want to create an initial configuration. Which mode should you use? A. copy mode B. user mode C. setup mode D. startup mode

4 Answers   Enrich,

---