Identify the correct pair of Novell Ethernet encapsulation
and Cisco
terminology?
A.) Ethernet II, Snap
B.) Ethernet 802.3, Novell-Ether
C.) Ethernet SNAP, Arpa
D.) Ethernet 802.2, Snap
- 1 Answers
- 4575 Views
- I also Faced
- E-Mail Answers
You have a Class B network address divided into 30 subnets. You will add 25 new subnets within the next year. You need 600 host IDs for each subnet. Which subnet mask should you use? A.) 255.254.0.0 B.) 255.192.0.0 C.) 255.255.252.0 D.) 255.255.248 0
What is the default LMI type? A.) Cisco B.) ANSI C.) IETF D.) Q933a
With distance vector routing protocols, it is never useful to send the same routing update packet back out the same interface that it was learned. This concept is called what? A.) Holddown timers B.) Poison Reverse C.) Count to infinity D.) Split Horizon E.) Link State
Which global configuration command will tell the router to load the IOS file 'IOS_filename' from FLASH memory at the next boot? A.) boot system flash B.) boot system flash IOS_filename C.) boot system IOS_filename flash D.) boot system tftp IOS_filename tftp_address E.) config-register 0x0102 IOS_ filename
Explain the difference between routable and non- routable protocols?
Which two statements about integrated services digital network (ISDN) are true? A. ISDN provides data only capability B. ISDN provides an integrated voice/data capability C. The ISDN standards define the hardware and call setup schemes for end the end digital connectivity D. Users receive more bandwidth on WANS with a leased lin of 56 Cops than with multiple B channels
Define the multicast routing?
What is the cladding?
Explain what are partial updates?
Define class full protocol?
in router we use config# ip host router2 ipaddress we use it for ping the neighbor router using name provided by us ..........instead of ip address in this max how many ip address can be assigned thanks
As a system administrator, you perform an extended ping at the privileged EXEC prompt. As part of the display, you see "Set DF bit in IP header? [yes] :" What would happen if you answered no at the prompt. A. This lets the router fragment the packet. B. It tells the router not to fragment the packet. C. This lets the router direct the packet to the destination it finds in its routing table. D. It tell the router to send the packet to the next hop router.
CCNA 
