What are two functions of the ICMP protocol? (Choose two)
A. to map IP addresses to Ethernet addresses
B. to map common names to network addresses
C. to forward SNMP alerts to management consoles
D. to generate an echo reply in response to a ping test
E. to send a host or pod unreachable message from a router
to the source of an undeliverable packet
- 1 Answers
- 3634 Views
- I also Faced
- E-Mail Answers
What is the minimum and maximum request timer?
What is the difference between bus topology and hub?
An optional parameter on an IPX access is the 'LOG' parameter. This records access-list violations when a packet matches. What else does the 'LOG' option do? A.) Records the number of times that a packet matches the list. B.) Return a message to user who is denied access the by list. C.) Notifies an SNMP Agent. D.) Saves the log to NVRAM. E.) Send an SNMP Trap.
what is firewall how fiarewall work how many interfaeces in the cisco pix 501 firewall what is the working of that dmz interface
What is a Frame Relay?
Identify the type of routing protocol that exchanges entire routing tables at regular intervals? A.) Link state B.) Interior gateway protocols C.) Appletalk routing D.) Distance vector
Which IP packet field will prevent endless loops? type-of-service identificationf lags time-to-live header checksum
You are given the following address: 128.16.32.13/30. Determine the subnet mask, address class, subnet address, and broadcast address. A. 255.255.255.252, B,128.16.32.12, 128.16.32.15 B. 255.255.255.252, C,128.16.32.12, 128.16.32.15 C. 255.255.255.252, B,128.16.32.15, 128.16.32.12 D. 255.255.255.248, B,128.16.32.12, 128.16.32.15
What is the default LMI type for Cisco Routers that are using Frame-Relay? A.) Annex D B.) Q933A C.) Cisco D.) IETF E.) ARPA F.) Anex A
Which command can verify Application Layer connectivity between 2 hosts? A.) ftp B.) snmp C.) telnet D.) ping E.) traceroute
Which type of switching reads in the entire frame before forwarding it? A.) Tabling B.) Store-and-Forward C.) Inverse ARP D.) Fast Forward E.) Cut-Through F.) Routing
hi... i am usin packet tracer 5.0.. i hav connect two routers A and B. A has 200.100.25.100 and 1.0.0.1 and router B has 200.100.50.100 and 1.0.0.2... i hav connected 1.0.0.1 and 1.0.0.2... now i want to route 200.100.25.100 and 200.10.50.100 usin rip.. i enable rip in both the routers... but whn i give the command show ip route... i jus get this Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set A# so can sombody tell me where i hav gone wrong... thanku
CCNA 
