Interested to Buy Any Domain ? << Click Here >> for more details...
Identify the true statements about the following access list:
Access-list 101 deny tcp 192.10.172.0 0.0.0.255 any eq 23
Access-list 101 permit ip any any
A.) This access list prevents the host 192.10.172.0 from
telneting
B.) This access list prevents any telnet traffic from subnet
192.10.172.0/24
C.) This access list filters some telnet access
D.) This access list denies any telnet traffic to subnet
192.10.172.0/24
E.) This access list is invalid
F.) The netmask on the this access list is reversed
- 1 Answers
- 5369 Views
- I also Faced
- E-Mail Answers
What does the command "IP name-server 255.255.255.255" accomplish? A. It sets the domain name lookup to be a local broadcast. B. This is an illegal command. C. It disables domain name lookup. D. The command is now defunct and has been replaced by "IP server-name ip any"
if i had a video conferencing device why should it is needed to configure a static IP for that,will it not work on the local lan.
Which command will display Ethernet 0's IP address? A.) display ip address e0 B.) show ip interface e0 C.) show address e0 D.) sh ip address e0 E.) show all
Which service takes information from multiple sources and allocates bandwidth on a single media? A. Time-division Multiplexing (TDM) B. Signaling System 7 (SS7) C. X.25 D. Frame relay
Identify 3 IP routing protocols? A.) RIP B.) AURP C.) OSPF D.) IGRP E.) ARP F.) ICMP
Hi Guys I am facing one problem while configuring PAP over Point to Point links. Configuration scenario is like this. ROUTER 1: (Hostname – R1) R1(config)#username R2 password CCNA2 R1(config)#interface serial 1/1 R1(config-if)ip address 10.0.0.1 255.0.0.0 R1(config-if)#lock rate 64000 R1(config-if)#encapsulation ppp R1(config-if)#ppp authentication pap R1(config-if)#ppp pap sent –username R1 password CCNA1 R1(config-if)#no shutdown ROUTER 2: (Hostname – R2) R2(config)#usename R1 password CCNA1 R2(config)#interface serial 1/1 R2(config-if)#ip address 10.0.0.2 255.0.0.0 R2(config-if)#encapsulation ppp R2(config-if)# ppp authentication pap R2(config-if)# ppp pap sent –username R2 password CCNA2 R2(config-if)#no shutdown Now problem is that, after configure the command “ppp authentication pap” the “Line protocol” status goes down on each router. But when I disable this command using “no ppp authentication pap”, the “Line Protocol” status goes up. What could be the problem, can anyone explain it plzzz….!!! Thanks in Advance…!! Shahin..
Which three protocols are correctly matched to their transport layer functions? (Choose three) A. route selection IP B. sliding window UDP C. well known pods IP D. route validation ICMP E. connection oriented TCP F. three-way handshake TCP G. no sequence and acknowledgement UDP
From Enable mode, a user types the letter 'C' and presses enter. There is more than 1 command that starts with 'C'. What message would the router return? A.) Nothing would be returned, the command is simply ignored. B.) unknown command C.) ambiguous command. D.) Copy to? E.) Configured console from console.
What is the IP extended access list range? A.) 1000-1099 B.) 100-199 C.) 1-99 D.) 101-200
Tell me how much internal and external ad of eigrp protocol?
what is bgp i have ansered all of them except mpls while i am working on it but i donot have threotical concepts on it the told me that they are keeping me on hold let try urs knowledge all the best
Identify the 3 key features of the Cisco Discovery Protocol? A.) Off by default B.) Will allow for the discovery of layer 3 addresses on neighbor routers C.) Verify connectivity D.) Open standard E.) Does not require any layer 3 protocols to be configured
CCNA 
