Answer / vijaykumar ashok birajdar

A-Check (Daily routein Check)

1. Check oil level.
2. Check coolant Level.
3. Check Battery Voltage & Water level.
4. Check all filter condition.
5. Check cleanliness of DG.
6. Check any Leakage.
7. Check V-Belt condition.
8. check fuel level.

B-Check (Every 300- 350 Hrs / 3 Months)

1. Change Oil, oil filter, fuel filter, bypass filter
2. change Air Filter.
3. Change water Separator.
4. Radiator cleaning with air.
5. Check polution level.


C-Check (Every 800-1500 Hrs / 6 Months)

1. Change Oil, oil filter, fuel filter, bypass filter
2. Change air Filter.
4. Change water Separator
5. Radiator cleaning with chamical
6. Check All Electrical terminal & thimbles
7. Check polution level
8. check sound level.

D-check (Every 3000- 5000 Hrs.)

1. Complete DG set should be dismental.
2. Turbo charger service
3. Injector Pin service
4. Cylinder Head service
5. PT Pump sevice &
6. Repeat same B-Check process.

If your DG set running hours more than 10,000 then in D-
Check You should need to be
1. Change Piston Bearing,
2. Change nozels,
3. Piston Cylinder also need to be change.
4. Change Canopy filter if require
5. Check polution level

Answer / shaik gulam gouse

A CHECK MEANS COMMINSING
B CHECK
ALL THE FILTERS CHANGE & CHECK THE HOSES
C CHECK
ALL THE FILTERS & AIR FILTER CHANGE
D
ALL THE FILTERS CHANGE & BELT

Answer / ayyappan.v

The 'A' check of DG is that Every day observation any own maintenance of operator .

The 'B' check of the DG is that oil service after 300 to 350 hrs of Generator's running include or exclude the Air filter replacement.

The 'c' check of the DG is that oil service after 1200 hrs and include of air filter replacement, radiator service included and top overhauling need in this service.

Answer / mangesh pandagle

A-Check (Daily routein Check)

1. Check oil level.
2. Check cleanliness of DG
3. Check Battery Voltage
4. Check any Leakage
5. Check all filter condition
6. Check oil Level
7. Check coolent Level
8. Check Check V-Belt condition


B-Check (Every 300- 350 Hrs.)

1. Change oil.
2. Change oil filter,fuel filter,bypass filter.
3. Change Air Filter.
4. Change water Separator
5. Radiator cleaning with chamical

C-Check (Every 800-1500 Hrs.)
1. Change oil.
2. Change oil filter,fuel filter,bypass filter.
3. Change Air Filter.
4. Change water Separator
5. Radiator cleaning with chamical
6. Check All Electrical terminal & thimbles
7. Check polution level


D-check (Every 3000- 5000 Hrs.)

1. Complete DG set should be dismental.
2. Turbo charger service
3. Injector Pin service
4. Cylinder Head service
5. PT Pump sevice &
6. Repeat same B-Check process.

Answer / hanumanthappa.j kolenahalli

A-Check (Daily routein Check)

1. Check oil level.
2. Check cleanliness of DG
3. Check Battery Voltage
4. Check any Leakage
5. Check all filter condition
6. Check oil Level
7. Check coolent Level
8. Check Check V-Belt condition


B-Check (Every 300- 350 Hrs.)

1. Change oil.
2. Change oil filter,fuel filter,bypass filter.
3. Change Air Filter.
4. Change water Separator
5. Radiator cleaning with chamical

C-Check (Every 800-1500 Hrs.)
1. Change oil.
2. Change oil filter,fuel filter,bypass filter.
3. Change Air Filter.
4. Change water Separator
5. Radiator cleaning with chamical
6. Check All Electrical terminal & thimbles
7. Check polution level


D-check (Every 3000- 5000 Hrs.)

1. Complete DG set should be dismental.
2. Turbo charger service
3. Injector Pin service
4. Cylinder Head service
5. PT Pump sevice &
6. Repeat same B-Check process.

If your DG set running hours more than 10,000 then in D-
Check You should need to be
1. Change Piston Bearing,
2. Change nozels,
3. Piston Cylinder also need to be change.
4. Change Canopy filter if require
5. Check polution level

Answer / bablu kumar

A-Check (Daily routein Check)

1. Check oil level.
2. Check cleanliness of DG
3. Check Battery Voltage
4. Check any Leakage
5. Check all filter condition
6. Check oil Level
7. Check coolent Level
8. Check Check V-Belt condition


B-Check (Every 300- 350 Hrs.)

1. Change oil.
2. Change oil filter,fuel filter,bypass filter.
3. Change Air Filter.
4. Change water Separator
5. Radiator cleaning with chamical

C-Check (Every 800-1500 Hrs.)
1. Change oil.
2. Change oil filter,fuel filter,bypass filter.
3. Change Air Filter.
4. Change water Separator
5. Radiator cleaning with chamical
6. Check All Electrical terminal & thimbles
7. Check polution level


D-check (Every 3000- 5000 Hrs.)

1. Complete DG set should be dismental.
2. Turbo charger service
3. Injector Pin service
4. Cylinder Head service
5. PT Pump sevice &
6. Repeat same B-Check process.

If your DG set running hours more than 10,000 then in D-
Check You should need to be
1. Change Piston Bearing,
2. Change nozels,
3. Piston Cylinder also need to be change.
4. Change Canopy filter if require
5. Check polution level

Answer / partha sarathi dutta

A check
1. Check for any external damage.
2. Check engine oil / leakage.
3. Check coolant level / leakage.
4. Belt condition.
5. Engine cleanliness.
6. Battery condition.
7. Battery cable looseness.

Answer / harendra kumar

A check per day
Check Lube oil Level
Check coolent Level
Check any Leakage problem
Check Battery volt&Trminals
Check Nut bolt Losses etc.
Check H.S.D day tank Level
All D.G sets cleaning
B check 300 house yards 6 month
Change Lube oil in chamber
Change Lube oil filter Lube oil by pass filter .
Change fuel filter and coolent filter.
Cleaning Air filter and water separator filter.
New Lube oil replace in d.g chamber

C check 1500 house ya 1 years
Full b check
Air filter change
Injector adjustment
Taipei cover change

D. Check every 6000 house ya 2 years
A+B+C+D check and
All D.g sets part repair

Answer / nandkumar

A-Check (Daily routine Check)

1. Check oil level.
2. Check cleanliness of DG
3. Check Battery Voltage
4. Check any Leakage
5. Check all filter condition
6. Check oil Level
7. Check coolant Level
8. Check Radiator Fan Belt condition

B-Check (Every 300- 350 Hrs. or 6mth.)

1. Change oil.
2. Change oil filter, fuel filter, bypass filter & gas cut.
3. Change Air Filter.
4. Remove water from water Separator
5. Change gas cut for piston Head.

C-Check (Every1500 Hrs. or 1yr.)
1. Change oil.
2. Change oil filter, fuel filter, bypass filter & gas cut.
3. Change Air Filter.
4. Remove water from water Separator
5. Radiator cleaning with chemical
6. Check All Electrical terminal & thimbles
7. Check pollution level
8. Engine Injector setting
9. Change gas cut for piston Head.
10. tapette setting or set clearance of inlet and exhaust valve


D-check (Every 3000 Hrs or 2yr.)
1. Turbo charger service
2. Injector Pin service
3. Cylinder Head service
4. PT Pump service &
5. Repeat same B-Check process.

Answer / ಶಂಕರಗೌಡ

ಅರಸೀಕೆರೆ

different beetween blower and compressor

5 Answers   ACC, Mando,

bhel machanical stream question papers

0 Answers  

The lowest allowable insulation resistance?

0 Answers   RRB,

The capacity of the compressor is considered to be maximum when the temperature of the air is a.Maximum b.minimum c.moderate d.

10 Answers  

how to calculate the turbine efficiency?

6 Answers   HAL,

substance is flowing in a pipe of 200 mm inside cylinder diameter ot an average velocity of 3m/sec. At a given section of the pipe line the pressure is 1.5 MN/m² absolute. what is the flow work of 0.5 cubic meter, expressed in joules passing through section? (a)1J, (b)75000J, (c)90000J, (d)25000J

1 Answers  

what are various part found in vapour absorption machine and its working

0 Answers  

why oil lift in screw chiller during change of climate.

0 Answers   Daikin,

What are the different types of springs?

1 Answers  

What is the importance of tolerance in engineering?

0 Answers  

What are the percentage of Makeup water in a standard thermal power plant (Steam turbine)?

2 Answers  

what is run out? how to calulate run out vaue.

0 Answers