What is the difference between Type test and Routine test?
Answers were Sorted based on User's Feedback
Answer / iamdon
Type test:
It is conducted on first prototype of product to confirm
the design specifications.This test is not repeated on
other products of same type.e.g, temp rise test
Routine test:
It is conducted on each product manufactured to confirm
proper maufacturing of each and every units.This test is
essential to be performed on each unit before distaching
the product to site.
Author:arbelectbit@yahoo.com
Is This Answer Correct ? | 276 Yes | 15 No |
Answer / dimple vashisth
type test---
these tests are intended to prove or check the design
features. type tests are done on samples when new design or
design changes are introduced.
routine test--
these tests are intended to check the quality of the
individual test unit.
these tests are done to ensure the reliability of test
objects and consistency of the material used in their
manufacture..
Is This Answer Correct ? | 64 Yes | 7 No |
Answer / chandan gupta
Type test:
It is conducted on first prototype of product to confirm
the design specifications.This test is not repeated on
other products of same type.e.g, temp rise test
Routine test:
It is conducted on each product manufactured to confirm
proper maufacturing of each and every units.This test is
essential to be performed on each unit before distaching
the product to site.
Is This Answer Correct ? | 36 Yes | 11 No |
Answer / manoj sharma
Type tests are done at samples for confirming design
parameter while routine tests are done at each and ever
items before dispatching material to sites.
Is This Answer Correct ? | 10 Yes | 5 No |
Answer / vijayakumar
i agree with the posted answers ,but my doubt is whether 1.Is the type test conducted on a sample product only or on one selected at random from different sample groups?Will periodical test come in the category of routine test and such tests should be conducted on all individual products in future?
Is This Answer Correct ? | 1 Yes | 0 No |
Answer / hhhhhh
Type test:
It is conducted on first prototype of product to confirm
the design specifications.This test is not repeated on
other products of same type.e.g, temp rise test
Routine test:
It is conducted on each product manufactured to confirm
proper maufacturing of each and every units.This test is
essential to be performed on each unit before distaching
the product to site.
Is This Answer Correct ? | 5 Yes | 7 No |
Answer / roman chang
Type test:
Engineer samples for test and it will be modified if the test failure.
Routine test:
When mass production, there will some of the test items be implemented in order to make sure the quality the same with engineer samples.
In safety standards, there have the other test which called Sample test, but I don't know what is different between sample test and the others.
Is This Answer Correct ? | 1 Yes | 6 No |
Answer / pradeep reddy
routine test:test conducted on apparatus used for testing.
Type test:Test performed on a material
Is This Answer Correct ? | 3 Yes | 17 No |
Why induction motors draws higher current during starting condition?
why is efficiency of transformer more than that of other rotating machines?
One of our gas turbine generator unit "1st stage rotor ground fault" alarm was occured several times. we tried to measure some voltage vulue ground fault protection relay (UNS3020a made by ABB and we measured the value of: Ground: 0.9VDC 5V: 5.8VDC 24V: 23VDC u+: 300 – 350mVAC Rf1: 17.5mVAC Rf2: 17.6mVAC The unit still running and the alarm was reset. As of 6pm yesterday and unitl now no alarm happened again. I our protection relay was defective?
Why is it prefer to initiate circuit breaker failure by "86" lockout relay not by "94" tripping relay ?!
why we used stone chips under the transformer area..
hi all, can any one tell me a website or document on basic interview questions on plc for a fresh diploma candidate?
with the help of drive can we run the 50hz motor on 100hz,what will be its effect.
what is the diffrantial relay???????why we use it on the MDB
What is the method for testing the differential protection stabilty in generator? When the time of starting What will happen if differentail protection connection wrong means?
why measure the gravity in battery?
What is the feedback in the control system?
Q) Write VBscript code along with QTPscript code in QTP tool for below scenario 1. Launch yahoo site(i know) 2. Do loogin(i know) 3.Click inbox link(i know) 4.Go to every page of mail box and count no.of read mails and no.of unread mails(i know) 5.Store page numbers, read mail count and unread mail count in a new excel file sheet 6.Create 10 types of graphs on that data 7.Do logout and close site(i know) 8.Save new excel files with graph