What is the difference between Type test and Routine test?
Answer Posted / iamdon
Type test:
It is conducted on first prototype of product to confirm
the design specifications.This test is not repeated on
other products of same type.e.g, temp rise test
Routine test:
It is conducted on each product manufactured to confirm
proper maufacturing of each and every units.This test is
essential to be performed on each unit before distaching
the product to site.
Author:arbelectbit@yahoo.com
Is This Answer Correct ? | 276 Yes | 15 No |
Post New Answer View All Answers
Pls Breifly explain about UPS (Inverter,Reserve,Rectifier,Float voltage,Boost voltage).
what is the constructional difference between a power transformer and potentian transformer?
what is the diference between the 4pole & 6pole DC Motors & what is advantage 6pole over the 4pole ?
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
How to protect sensitive loads such as Dosing pumps inside a factory from voltage surge/voltage fluctuation.
What is the difference between isolators and electrical circuit breakers? What is bus-bar?
How to choose the vector group for the step up and step down transformers??? Tell me the which vector group is suitable for step up and step down transformers and whats the reason to choose and whats the benefits???
What do you mean by turns ratio of instrument transformer?
Briefly describe means used by electricity suppliers to influence the flow of active and reactive power in power networks (one for each type)?
How to Calculate The Neutral Earth flat design calculation for the Synchronised generator (Gen 1-650Kva, Gen 2-725Kva
What is the criteria for selecting the voltage classes of an AC Induction Motor.The KW rating above/below which ht/lt selection is made may be provided in details.
how to calculate single phase motor efficiency ?
we need a ntpc previous papers
I need the recommended size for a 3 phase transformer at 13.8 KV Primary and connected loads of 3000 kVA at 4200 volts and 2375 kVA @ 480 volts AC.
what is the formula for hv test for cable and circuit breaker..????