Interested to Buy Any Domain ? << Click Here >> for more details...
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
1163Post New Electrical Engineering Questions
Transmission through a short line depends on
While HT line put on to activate ACB in low tention panel VCB tripping instantly.why it happens
Why we find the sensitivity for the CT's to check?
What is the working principle of MIG welding? and its out put Voltage?
How to Calculate Current Rating of SDFU (Switch Disconnector Fuse unit) for Protectionof Capacitor Bank connected to Busbar of 800Amp,in LV side of 11/0.433KV, 250KVA Transformer?
how to determine Sq.mm size of finolex power cables.
What is the difference in calculating size of AC cables compared to calculating size of DC Cables? Usually DC Cables are larger than AC Cables although they have the same ampacity. Why is it?
what is the meaning of impedance protected in instrument cooling fan
How stabilizer works??
what is the use of power transformer in GSS.
There is any especial requirement for motor to drive through with VFD?
What is the dc grounding system and what is diff between AC/DC grounding system?
What is core CT & it's function?
Generation of voltage for each phase are same of a turbogenerator.Although the short circuit current flow when two phase of turbogenerator are shorted(where current can't flow without potential difference),why?
Why Water motor is not taking a load or pressure while everything is correct. (Note: Motor running properly)
