Interested to Buy Any Domain ? << Click Here >> for more details...
why field winding is placed on rotor winding not on stator
winding in case of synchronous machine?
- 13 Answers
- 38696 Views
- HAL, TATA, I also Faced
- E-Mail Answers
Answer Posted / ankitshah
actually the rotor has very less current flowing throuth it
and for designing synchrounous of large capacity there
would be excessive heating at brush contact which puts a
limitation on it, at the same time field winding is given
dc current which is less compared to armature current. Also
by putting armature on stator higher voltage can be
generated.
| Is This Answer Correct ? | 10 Yes | 2 No |
Post New Answer View All Answers
what is die electric strnth of transformer ?
What will be the fault current of any system when its generation is 10% of BASE generation( FUll Load )?Will is 10% or the same as full base calculation?
What is inrush current?
what is the need to express current and voltage in rms value? rms value is also called as effective value,what is effective value?
15hp motor wound by 0.9mm & 0.95mm magnet wire. at no load test it draw 4.2A current. Another motor with same condition draw 9.2A current. How can that occur? pls help
1)Explain why the cradle guard is used on railway crossing in overhead line construction?
11 kg trivevter meter has rating of -/5amps. And pt ratio11000/110v and is connected with 11kv ct/pt unit of cr ratio 75/5amps. And pt ratio of 11000/110v while checking accuracy of meter with HT Accuchek meter what value of PT ratio and CT ratio to be filled in Accuchek meter
What is ferro-resonance in electrical system? Why it occurs and what are measures to prevent it?
7- What is the Dissipation Factor and the difference between it and Insulation Resistance Test? 8- What is the task (function) of DC and AC reactors in power plant? 9- What is the task (function) of (open delta with earthed) in some types in transformers? 10- What is the base of the selection of the vector group in transformers? 11- What is the zig-zag transformer and its function by drawing in large detail? 12- What is the polarity ? 13- Why we make short between phase(R) in high side and phase (r) in low side in vector group test? Where High Side ( R ,S and T ) and Low Side ( r ,s and t ). 14- What are the time on delay and time off delay? 15- What is the vector group? 15- What is the task (function) of different types of vector group such as Dyn11 , Dd0 , YNd1,……..,?
what is the series parallel connection of capacitors? and how can we use these application in three phase motors for controlling torque?
A mass of 1200g is accelerated at 200 cm/s2by a force. The value of the force required is:(a) 2.4N(b) 2400N(c) 240 kN(d) 0.24N
Explain the working principle of Synchronous Generator and Assynchronous generator?
i need about 10 years of GATE solved papers in pdf format and even mock tests toooo
All tape of electrical questions Answers tape of motor transformer e.o.t crane
What are the basic components of the feedback control system?
