Interested to Buy Any Domain ? << Click Here >> for more details...
how do we calculate quantity of cement , sand and
aggregates in 1 m3 of M30 grade concrete ?
- 31 Answers
- 442105 Views
- ABES Engineering College, Gammon, Jalanidhi, NCC, I also Faced
- E-Mail Answers
Answer Posted / sjtbehera
In the case M30 concrete we calculating by design mix.but
incase of norminal mix we can use 1:1:2.
calculating cement, sand and concrete.
toal ratio=1+1+2=4
cement = 15.4/4=3.85cum=11bags
sand=3.85*1=3.85 cum
chips=3.85*2=7.7 cum
Notes: why we divided 15.4
but it is difficult to acess exactly the amount of each
material recquired to produce 1cum.of wet concrete when
deposite in place.
to find out volumes of cement sand & coarse aggregate
divided a numerical no. 15.4 variable up to 15.7 according
to proportioning and water cement ratio by the summation of
the proporation of the ingrediants used and then multiply
the result thus obtained their respective srength of
proportion.
| Is This Answer Correct ? | 156 Yes | 216 No |
Post New Answer View All Answers
What are the uses of groynes?
What is the quantity of cement used for stone pitching work of 100sqm 225mm thick and cement mortar of 1:6? And how?
How to arrive dry volume of concrete (1.52 to 1.57) ?
What are the joints wants to made in masonry where door opening, arches like etc..
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
In earth work 1300 cum soil how to calculate how many liters require in water
how many cement used in single story residential building per sqft
hoe much fine & sourse agregate required for concrete mix of 1: 1.5:3 by volume in Cu.Ft
What is kn measurement?
how we check the thickness and line of ceiling plaster.
Explain why concrete barriers have curved surface profiles?
Define What are the materials used in building a gravity dam?
how to prepare site mix design
hi every body..i have applied for RRB section engineers CIVIL.i wanna prepare for that,so can any one suggest me some books and where can i get the syllabus for this..i would be vry greatful if any one can help in this regard
2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32
